Australian turbo build

Thanks oz booster.

Would you know anyone with a turbo setup in Sydney that I might be able to have a look at next week? I'm up there for work next week.
 
Letting Leonard loose on it Pan ?

PMed Ice with Carls info, he has a couple of different brand turbo bikes in the shop at the moment .
 
Thank oz.

Next question...

I'm going to have the stock each flashed rather then installing a pcv or similar.

In doing so would I be best:

A- reuse stock O2 sensor
B- install a wide band O2 sensor
C- remove the sensor completely and dyno tune without one.

If I'm to use the sensor what is the best place for it? Before or after the turbo?

I have also gone and purchased an external waste gate. Can I bolt the internal one shut or is it best to hook both up. And let hem work together?

Thanks for the help.
 
B

After turbo, sensor cant stand the heat before

On your turbo if it were me i would put a separator on the outlet flange plate , remove the wastegate flap, oversize the hole and grind a good lead in so the exhaust can make the turn easier
and mount the wastegate off a pipe from the outlet flange
end result should look something like this
DSC02004-1.jpg

Catch up with Carl ?
 
I didn't get a chance to catch up with him. I had to work late each day on the course... Next time maybe. I'll let you know next time I'm down shep way. I get down there a bit for work.
 
So I have been busy is the last few days.

Built a bike stand so I could start work.

Then got in and did the tear down

And mad myself a set of headers...

More to come

image.jpg


image.jpg


image.jpg


image.jpg
 
Hey guys sorry for the delays but I have been making slow progress on the build.

It has all come together now and the bike is up and running again with a turbo.
I will post some pics tomorrow.

Thanks for all the help.
Big shout out to Ozbooster thanks for all your help.
 
built as it sits

TD05-20 turbo
home made headers
38 mm external waste gate with 3.7 psi spring.
woolich racing log box for tuning.
Zeitronix Zt-3 Wideband O2 Controller with ZR1 display
dragon digital boost guage.
turbo outlet is 2.5" dump into 2" pipe with Yoshi Tri-oval muffler. (silent assassin)
plenum from Mypowersports (ebay)
 
Back
Top