Any Idea's How To Slow Down Blinker Rate

[RideLikeTheWind]

I converted my stock undertail to a custom undertail with LED's on my

2005 Busa. The front blinkers are incandescant. The blinker rate is much

faster now and I was wondering if I should use Resistors or a Blinker Relay

with "no bulb out " indicator to solve this problem?

 

[Mr Bogus]

go to www.autolumination.com Tail Light Brake Light Turn Signal LED Bulbs and either get the correct flasher and adapt it in or get the resistors and wire them into the tail's turn signal wires..

the flasher is a bimetal spring and without the incandescent bulbs, it does not get very hot so cycles fast...

 

[Wild07]

Napa p.n. NF LF12. electronic flasher. Re pin the stock flasher like Clear Alternatives instructions but use the LF12. Slow, loud and works great with LEDs and incandessent bulbs.

 

[Mr Bogus]

Napa p.n. NF LF12. electronic flasher. Re pin the stock flasher like Clear Alternatives instructions but use the LF12. Slow, loud and works great with LEDs and incandessent bulbs.

Thx

 

[Dr E]

Dive in quicker and cancel the switch that much faster!

Sorry...just had to say it

 

[Takeuon]

Napa p.n. NF LF12. electronic flasher. Re pin the stock flasher like Clear Alternatives instructions but use the LF12. Slow, loud and works great with LEDs and incandessent bulbs.

Is that the same for a GenII ?

Dive in quicker and cancel the switch that much faster!

Sorry...just had to say it

 

[BA BUSA]

Did you check your blinker fluid ???

 

[BA BUSA]

Good stuff