Another lowering link question





#1
I am going to make a lowering kit for the bus here shortly. I will make 1 and 1/4 inch spacers for the front. Does that sound about right?


I also will make the rear links. Does anyone have the center to center measurement on one of these lowering links? And how much lower it drops the rear? This would save me a bunch of time.

Oh, this is for drag racing purposes only, I also have a strap for the front.

I am also going to start setting the suspension for street riding prob this weekend. I am going to start with preload, front and rear, and static sag. I will let you guys know what I find!!!!!!!!

Later for now guys.
 

TulBusa

Donating Member
Registered
#4
This question was posted over 2 years ago, and no answer was given. A fellow Busa owner and I were discussing measurements on the links and what is precisely the length center of hole to center of hole on 1, 2, and 3 inch on the lowering links. Can someone give us the exact answer to this?
 

TulBusa

Donating Member
Registered
#6
Measuring my stock links it looks like it's 4 and 11/16 or roughly 4.687" from center of hole to center of hole. So what is the length for a 1, 2, 3 inch drop, center of hole to center of hole?
 

qwknuf6

Registered
#7
Stock dogbone = 4.675 center to center

APE 3 Hole, 1st hole =4.580 center to center
2nd hole =5.175 center to center
3rd hole =5.785 center to center

As you can see the 1st hole will raise the back slightly ,I would GUESS the second hole would lower the rear of the busa 1 1/2" and the last hole would lower it 3" .


Mark
 

Similar threads





Most likes - Past 7 days

Latest Bikes

Forum statistics

Threads
171,612
Messages
3,065,184
Members
47,181
Latest member
CarlT
Top