Adjusting fast idle after rerouting it

[cobravenom39]

So, I rerouted my cable to the left of my bars and through the two screws for the tank, and now the fast idle is no worky. I can't figure out how to get this thing to work. I keep trying to shorten the cable, but I'm shortening the travel of the fast idle lever on the handlebars. It isn't in the shop manual, either.

I would have searched if it worked. Sorry

 

[proud dad]

Take most of the slack out of the cable with the 2 locking nuts where it mounts to the throttle bodies.There is also an adjusting screw at the throttle bodies for the fast idle.Roll the lever back and you should be able to set your fast idle by turning the fast idle screw.

route cable to the left of the screws

 

[cobravenom39]

Thanks!!! I need to reroute it like that. I have in between the screws. Exactly what I was looking for!!!

 

[runeight]

Take most of the slack out of the cable with the 2 locking nuts where it mounts to the throttle bodies.There is also an adjusting screw at the throttle bodies for the fast idle.Roll the lever back and you should be able to set your fast idle by turning the fast idle screw.

route cable to the left of the screws

That looks clean. I'll have to do that.

Thanks.

r8