99-07 busa hp increase to match 08's

[vman1300]

Recipe for 190 rwhp on my 99:

stock bore, stock pistons
Lees ported head, shaved for a slight bump in compression
bored throttle bodies
intake cam mod
Full Akra exhaust
PC3
Small box mod
BMC filter

It wont take that much to equal the 172-175ish of the 08. My 99 made 178 with the Akra, cam mod, small box mod, BMC filter and tuning.

 

[Commuta_Busa]

just drop some cams in you're there...

 

[foresteronw]

that 198 is crank power which will be mid to upper 170's at the wheel.

you can do that fairly easy for under $2000 if you are patient and look for used parts.

Good full system Akra, TiForce, HMF Big Bird, BDE GENIII, etc
Cams (aftermarket will give you a few more ponies over two intake cams)
All four short stacks
Power Commander
BMC Race filter
Good tune
PAIR removal

This shoudl put you high 170's if degreed right with a good map, low 180's in a strong bike.

The thing to remember though is that new bike should have more low/mid power and torque. We'll have to wait and see what the real world numbers are though.

 

[Tybalt71]

Sorry just to clarify: I have 200 RWHP with my set -up, stock bore

 

[dadofthree]

(Tybalt71 @ Jun. 27 2007,11:18) Sorry just to clarify: I have 200 RWHP with my set -up, stock bore

 

[GMbusa]

I thought he wanted 198hp to the wheel, not at the crank. That makes things a bit easier.

 

[IFLYLOW]

JE 13:1 dropin (stock bore),
web 378/330 cams,
cleaned up heads,
Carpenter valvesprings (60#)
Ape Super heavy duty clutch springs (only using 3)
hmf highmounts (duals),
93 octane