2000 busa vacuum

Dutch893

Registered
Hi so i have a 2000 busa and i bought it from a friends wife to help pay for funeral services after he past...he had removed pair valve and did an airbox mod...i never started it cuz 2nd gear was gone...so after about a year i finally replaced trans i finally started the bike and it runs like crap...vacuum lines were all off the bike...i looked at pictures online but none of them shoe me a pair valve delete and air box mod...also i noticed the vacuum line supposed to hook up to fuel pressure regulator was sucking gas out of the regulator...im not a bike mechanic so idk if this is normal...please help!!! Pictures is a plus thanks in advance
 
Here is what u should need.
Ask about each pic if needed. :thumbsup:
The hoses,the pair intact,the pair removed with plates installed,air box,air box hose u need to plug, etc. you can buy block off plates or make 'em.They don't have to be pretty.
Rubb.
1621420


1621421


1621422


1621423


1621425


1621424
 
Okay so it does have the airbox mod and definitely the pair valve deleted...its missing everything in the circle except for the air mass sensor on the airbox

Screenshot_20200626-200804_Chrome.jpg
 
Here is what u should need.
Ask about each pic if needed. :thumbsup:
The hoses,the pair intact,the pair removed with plates installed,air box,air box hose u need to plug, etc. you can buy block off plates or make 'em.They don't have to be pretty.
Rubb.

View attachment 1621420

View attachment 1621421

View attachment 1621422

View attachment 1621423

View attachment 1621425

View attachment 1621424
Damn, you are The maan!!!
I also have a 2000 Bus, and noticed that the previous owner had cut one vacuum line and plugged another one whilst I was changing the spark plugs yesterday
Will use your guide and see if I can scare away the Gremlins that live in the bike muhuhahaha
 
Back
Top