2 nos nitrous  bottle mounted

[lookn4abusa]

Im look for pics or anyone setup of how you can run 2 bottles i always have my rear seat on and i was told you cannot get the 2lb inside the tail i would like to maybe get away with a 1.25 or 1.50 bottle on each side of the subframe tucked inside of the tail. any info would be greatly appreciated

 

[frisbee]

PM Goldenchild.

 

[GIXERHP]

Schnitz racing has the bracket to mount the 2lb bottle in the hump!

 

[chevelle]

i run a couple of 1.25 lb bottles on my 12,the arm is + 2.4

it would be a little harder to do on the busa because of the box,you would have to buy or fab up a mount and weld it on,the bottles will have to be insulated to keep the pressure in check,lots of heat down there

here is a pic of my setup on the 12

 

[lookn4abusa]

see i dont like running the hump i normally have the ##### seat on, i would like to have the bottles hidden i was think on the inside of the rear fairing one on each side an drill a whole thru the trunk to connect im working with golden child on a kit just wondering if anyone has done this

 

[frisbee]

There was a video with 2 bottles mounted that way and i'm looking for it right now .

 

[frisbee]

http://www.dynotunenitrous.com/store/scripts/prodView.asp?idproduct=141

goldenchild is doing a set up like this on my bike