turbo

  1. H

    Boosting a High Mileage Engine?

    This example would be for a street bike and not raced at the track. If generating a peak power of 250-300 horsepower via a supercharger (or a turbo) on a used Hayabusa, does the engine have to be low mileage? If so what is low mileage? Does a certain number of miles necessitate internal engine...
  2. T

    Gen 2 turbo busa hunt

    Afternoon ladies and gents, For a year or so now I’ve been wanting a street legal gen 2 busa turbo. Now I found one sold by GT’ motorcycles in Plymouth (south west England) in 2013. Which is very local to me. It was built by big cc producing 525bhp. VRN; W13GSX I’m hoping to track down this...
  3. GXR1147

    Upgrading RCC stage 1, now has issues.

    installed a RCC stage 1 kit about 3 years ago, had frank at powerhouse tune it and all was great. Zero complaints or issues. Then I wanted more boost. Picked up a first version RCC ultra plenum (used, off the internet() and the other parts needed, including 60# injectors (new), from frank at...
  4. U

    Twin Scroll Turbo Divided Flange

    Hey guys, I’m planning to build exhaust manifold for a twin scroll turbo. I just wanna build it right so according to what I read, I should join 1st firing cylinder with the 3rd into one hole of the divided T3 flange and join the 2nd firing cylinder with the 4th into the organization hole of...
  5. I

    O-ringed Chain That Can Support 350hp?

    What chain is everyone using for a 350hp build? I had an Ek drz2 (11,500 lbs tensile strength) lasted me about two months before it just wore out beyond its limit. I know it's a non-oring chain and not for daily driving because it would wear out a lot faster because of not having o-rings to...
  6. D

    C24 C27 Codes. Can't Shake Em.

    Alright I'm at the end of my wits. I have a gen 1 Busa engine in my sand car. I'm getting the C24 and C27 codes. (Ignition signal 1 and 4). I ran a NA motor in the car for 12 years. Lost the bottom end. Picked up a new motor and Turbo. Original block was a 2004. New one is 2001. I'm using the...
  7. D

    Reading 0 Rpm Around 5600 Rpm

    So I have a Gen 1 motor in a mini sandrail. I ran a NA motor for the last 12 years. Over a year ago my bottom end went out so I picked up a new (used gen 1) with a turbo kit. Not sure the kit brand. pretty sure it's custom setup. Anyways. I'm running stock ECU with PC5. I got it in the car and...
  8. J

    Help!!! Need A Base Map For Velocity Stage Ii Turbo Kit Using Microtech!

    Needless to say I bought a used stage 2 velocity turbo kit and the base tune is completely screwed up. I need someone that can screen shoot a velocity map so I can manually enter the numbers and send me a pic of it or email it. I only have the handset right now so I really need a screen shot so...
  9. J

    Help!!! Need A Base Map For Velocity Stage Ii Turbo Kit Using Microtech!

    Needless to say I bought a used stage 2 velocity turbo kit and the base tune is completely screwed up. I need someone that can screen shoot a velocity map so I can manually enter the numbers and send me a pic of it or email it. I only have the handset right now so I really need a screen shot...
  10. The bike that always makes me smile

    The bike that always makes me smile

    My first and only bike I love, even after the 2nd 600+ mile day!
  11. Turboosted

    Turboosted

    My biike !
  12. Turboosted

    Turboosted

    kkk27 MC-Xpress
  13. Summer 2014

    Summer 2014

    Holiday trip
  14. turbo hayabusa

    turbo hayabusa

  15. Westfield Hayabusa Turbo

    Westfield Hayabusa Turbo

    Intercooler
  16. Westfield Hayabusa Turbo

    Westfield Hayabusa Turbo

    Getting there.
  17. Westfield Hayabusa Turbo

    Westfield Hayabusa Turbo

    Under bonnet porn!
  18. Golia Custom Works

    Golia Custom Works

    Goliat Custom Works
  19. Golia Custom Works

    Golia Custom Works

    Goliat Custom Works
  20. Blue Turbo

    Blue Turbo

Top