Busahaya's install pics!!!

Charlesbusa

Used to be a SoCal Busa
Donating Member
Registered
What it looks like stock.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110764559 -->

stock.JPG
 
Remove the oil cooler cover, fan, and horn.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110764621 -->

fan__oil_cooler_cover__horn.JPG
 
Then remove the mounting hardware for the oil cooler and radiator. Leave the fluid lines connected, the radiator and oil cooler will still move forward with those connected and won't make a mess. This gives you room to get at the headers.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110764764 -->

room_after_fan.JPG
 
Remove the pair big air line here and cap.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110765122 -->

big_air_line.JPG
 
Remove the small pair air line here and cap. This is a pain to get to.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110765233 -->

cap_little_air_line.JPG
 
What we think of the pair valve, he he he.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110765320 -->

darn_pair.JPG
 
Install the block off plates.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110765380 -->

block_off_plates.JPG
 
Slip in the sleeves and then bolt on the mounting bracket.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110765472 -->

sleeve_trick.JPG
 
Before the headers.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110767970 -->

before_headers.JPG
 
After headers installed.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110768036 -->

after_headers.JPG
 
Cleaning the pipes and muffler with alcohol, don't want any stains before getting it started for the first time.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110768554 -->

cleaning.JPG
 
First problem is the fan just barely touches one of the headers.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110768718 -->

fan_touches.JPG
 
Problem 2 the pipes touch the bottom of the fairing.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110769343 -->

touches_fairing.JPG
 
Problem 3 the pipe touches the loop the spring mounts to.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110769425 -->

touches_spring_hole.JPG
 
Finish pic one.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110771401 -->

pic2.jpg
 
Finish pic2.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110769609 -->

bike2.JPG
 
Finish pic3.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110769642 -->

bike3.JPG
 
Finish pic4.



<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110771152 -->

pic1.jpg
 
And finally, its always good to have some help!!
tounge.gif




<!--EDIT|Charlesbusa
Reason for Edit: None given...|1110769717 -->

guard_dog.JPG
 
Back
Top