My Busa Overhaul

29 pages 500+reply ive followed this thread from the beginning and its like a roller coster ride i catch myself getting excited and pissed about the same things as mlsduke1 dose all & all im glad your almost done
 
This has been a poor boy's adventure. That's for damn sure. Thanks for sticking with it lol! Today I should get my Schnitz stuff and Gixx1300r should get the stacks in so WAY more pics are coming. Should I post the pics I have so far off the nitrous system?
 
Gixx1300R Makes some DOPE ASS Nitrous Kits. See him for all your nitrous needs!

20140206_121135.jpg


20140206_121150.jpg


20140206_122402.jpg


20140206_122517.jpg


20140206_122651.jpg


20140206_122702.jpg


20140206_122715.jpg


20140206_122755.jpg


20140206_122807.jpg


20140206_123220.jpg


20140206_124122.jpg


20140206_124140.jpg


20140206_125521.jpg


20140206_125710.jpg


20140206_130450.jpg


20140206_130642.jpg


20140206_131153.jpg


20140206_131221.jpg


20140206_131230.jpg


20140206_131332.jpg
 
when you fire it up break it in and then beat it up....it can get away from you before you even know it...then hit the no2 button...be sure the system is working correctly prior to making a pass...avoid a lean out situation
 
Just thought I'd share my mod list "so far"

Dynojet Power Commander V
Speedohealer
Yana Shiki Blade Levers
Roaring Toyz Metal Grips
HEL Brake and Clutch Lines
Custom 220 Gauges
Large Trunk Mod
Painted “Charcoal” Frame
Pair Valve System Removed
Small Airbox Mod
Clear Alternatives Blinker Covers
K&N Air Filter
Rear LED Blinkers
Gen II Crank-Lightened, Balanced, Counterbalance Gear Removed By APE
Counterbalance Mechanism Removed – SAE Outlaw Racing Dummy Shaft Installed
Ceramic Painted Brake Calipers
Full Up and Down Cut Transmission by M/T Performance
JE 84mm Pistons
Ported, Polished, and Decked Head by M/T Performance
New Valves, Bronze Guides, and APE Springs and APE Titanium Retainers
Webb .415 Cams
OEM Rods
OEM Main Bearings
Cometic Gasket Kit
APE High Volume Oil Pump Gear
Oil Mag Plug
OEM Cam Bearings
SAE Outlaw Fully Adjustable Cam Sprockets
OEM Rod Bearings
OEM Thrust Bearings
Suzuki Bond (Sub Yamabond)
K&N Oil Filter
JT Steel 18/40 Sprockets
Baja Designs Nissin Hydraulic Switch for Starting
APE Studs and Nuts
Cometic Head Gasket
Hot Cams Shim Kit
Outlaw Racing Kevlar Clutch
D2 Moto HH Sintered Brakes F&R
ECU Flash by Boosted Cycle Performance
Clutch Slave Support – Exotic Cycle
APE Manual Cam Chain Tensioner
Cams Degreed By Tombo Racing
APE Clutch Spring Kit
Schnitz Tail Section Bolt Kit
Schnitz Low Profile Radiator Fan
Muzzy Aluminum Fan
Tiger Racing Triple Gauge Mount Plate
Tiger Racing Tank Quick Release Pins
Tiger Racing 24v Kit With 8 Amp Battery
Tiger Racing Nitrous Hump Mount Bottle Holder
Schnitz 41mm Velocity Stacks
Schnitz Wide Open Throttle Switch
Schnitz Power Commander Automatic Map Switch Harness
AEM 320 LPH Fuel Pump
Tombo Racing 8” Over Swingarm With Air Tank
Tombo Racing Chain Guard
Bridgestone Battlax BT-023 Tires
GlowShift Fuel Pressure Gauge
GlowShift Oil Pressure Gauge
GlowShift Oil Temperature Gauge
GlowShift Oil Filter Sandwich Adapter
SmartFire 850CC Injectors
Five 0 Motorsports Injector Adapters
Yana Shiki Triple Clamp
Brocks Full Alienhead Exhaust
EK ZZZ 530 – 150 Link Chain
Coolant Temp Switch Relocate Kit
80 Shot Custom Nitrous Kit
 
If that is a oil filter housing, it wont work with the Brocks header!
 
When are getting the motor back??

How off was the Cam timming?
 
Yeah........ I realized that after I bought it. Just another part to add to the others that I'm selling

If that is a oil filter housing, it wont work with the Brocks header!

The cams actually weren't that bad. The exhaust wasn't off and the intake was 110 off. As soon as the swingarm comes in, they're sending that and then engine at the same time. I'm hoping soon

When are getting the motor back??

How off was the Cam timming?
 
Back
Top