Spark plug issue & question

Dansch06limited

Registered
So I decided to go with NGK iridium plugs this time, after I received them in the mail I went to pull the old ones out and when I compared them to the new ones.. they do not match up. But the part # on the plug is what people on the forum had said goes in a gen 1 hayabusA. I must be missing something. Can someone clarify which part number is correct? I don't know what i could have done wrong ? I bought cr9eix and what came out the bike are cr9e. And according to the seller of the plugs, both are apparently 3521 's. I am going to try putting a picture up to show people the difference in the two. It's on the top where the wire boot goes on the plug. The iridium plug is the one that the wire boot didn't fit over. thnx in advance for any feedback!
<a href="http://s275.photobucket.com/albums/jj307/dansch82/?action=view&current=7855933c.jpg" target="_blank"><img src="http://i275.photobucket.com/albums/jj307/dansch82/7855933c.jpg" border="0" alt="Photobucket Pictures, Images and Photos" /></a> <a href="http://s275.photobucket.com/albums/jj307/dansch82/?action=view&current=7f68418f.jpg" target="_blank"><img src="http://i275.photobucket.com/albums/jj307/dansch82/7f68418f.jpg" border="0" alt="Photobucket Pictures, Images and Photos" /></a>

7f68418f.jpg


7855933c.jpg
 
You were right.. Thanks man :beerchug: I can't believe it was something so obvious yet never crossed my mind ???

Sometimes we overlook the simple things.:beerchug:
Meant to advice you to blow compressed air into the spark plug chamber before removing the original plugs to blow out any possible debri. Use Anti-Seize on the new plug threads?
 
Back
Top