Lowest rumble pipe?

Luvanicebum

Registered
I have yet to install a new pipe on my 06 Busa
I'm in the process of "Blacking" out the entire bike, so
whatever pipe I choose will need a SS shell for a Gloss Black ceramic coating.  
I'm thinking on just keeping to stock.  I like the look of dual pipes and I want as low of of  a poppy header sound as possible.  any suggestions?
 
Can you ceramic coat aluminum?If so Tsukigi bolt ons have a low rumble.Give Greg a call at Hyper Bike Performance[sight sponser].Probably get them pretty cheap.
 
+1 on the Tsukigi bolt-ons. GSXcite has them and I am impressed at how good they sound!
 
i like the yosh TRS.

CIMG4056.jpg
 
Yosh RS3's,Micron race stainless,both have the low rumble youre lookin for.
 
egitarre77.gif

Thanks for your suggestions. I'm still researching ceramis coatings, so I'm not sure if a thin aluminum housing can stand the baking process. I know you have to disassemble any Muffler, removing baffles, insul etc...to get it coated. The most common ceramic coatings are heat resistant up to 1300F , so they look
brand new for the long haul. I looked into Powder Coat and even powder coat "Blues" up after long hard rides.
AAAssjani.gif
 
(nitrousjunkie @ May 21 2007,07:43) Yosh RS3's,Micron race stainless,both have the low rumble youre lookin for.
+1 After listening to a bunch of different exhaust last weekend at the MeetnGreet, Yoshi to me has the best low sound without being too LOUD. And yeah, that's what I'am ordering  
tounge.gif


THANKS DREW  
beerchug.gif
 
Akrapovic bolt-ons have a very low rumble. I love mine! Right after you put them on and fire up the bike you'll notice the difference instantly. They sound best when you downshift while coming to a stop or if you ride in 2nd gear and let off the gas.... sounds like this: rrrrrrrrrrrrrrrrrr (let off the gas) bbbbbbooooooooooooooooooo!!!

lol!

HPIM0799xxxxxxxx.jpg
 
So do most of you Yoshi people go with Zyclone or Race baffles? I really don't want anymore volume, just a deeper tone.
 
(Spike @ May 22 2007,12:26) So do most of you Yoshi people go with Zyclone or Race baffles?  I really don't want anymore volume, just a deeper tone.
Not sure what you are talking about sir....

You can hold mine up and look straight through them....

Kinda like an old 'glass pack' from back in my younger years!!!

Honestly tho', if'n your looking for keeping the dual can motif and dont want to replace the whole system the Yoshimura TRS cans sound pretty good, have the kanji graphics burned into the rear of the cans and in general just look and sound kick azz, but if I had it to do over again I'd replace the whole smear and get the additional HP....

My bad there as my short cut showed up on a dyno of late!
 
I haven't heard any deeper sounding than my Two Brothers.

Here's a crappy video of mine on a crappy day.  One of these days I'll get around to filming a couple drive bys.

<embed width="430" height="389" type="application/x-shockwave-flash" wmode="transparent" src="http://vid110.photobucket.com/player.swf?file=http://vid110.photobucket.com/albums/n116/thebbbrain/wintermods/Fullexhaust.flv"></embed>

Here's another of the bike on a dyno.

<embed width="430" height="389" type="application/x-shockwave-flash" wmode="transparent" src="http://vid110.photobucket.com/player.swf?file=http://vid110.photobucket.com/albums/n116/thebbbrain/wintermods/DynoRun.flv"></embed>
 
(Spike @ May 22 2007,14:26) So do most of you Yoshi people go with Zyclone or Race baffles? I really don't want anymore volume, just a deeper tone.
According to a Yosh rep the only baffle they make for the Busa is race baffle..
wink.gif


btw I run Yosh as well 4 into 1 RS3 Ti..
cool.gif
cool.gif


cool.gif
 
Back
Top