Recent content by WOOSAB

Hey fellas it has been a while since i posted on here. I had a 2008 busa i purchased new then in 2014 add a stage 2 rcc turbo with tons of goodies. Well the bike was stolen about 6 weeks ago, the insurance has finally paid me out. Im been searching around on the net trying to find another gen2...

Let me be the first to say I didn’t listen! I wanted to change the color of my busa and decided to be cheap and order fairings from AUCTMART after reading several reviews on this site and others. They were not always the best reviews but better than most overseas fairing companies that I...

Boost guage is off. Based off the springs we are running 7-8 on boost. The HP numbers are correct and that was on Pump gas... Anyone have block offs or screens or something to put down at the bottom of the bike where the headers normal are so the turbo can't be seen at all. IT's very well hidden...

i'm take it to another one of those places and have them put it on dyno and i'll post boost and dyno charts and what they say.. Now i'm scared to ride the thing... :banghead:

me too.. let me give a few of the other local builders a call. I believe there are 2 rcc dealers local to me. Cycle Werks in Ft. Worth and Johnny Cheese in Austin TX

Honestly no secret maybe I better ask my builder that question... Sabin performance is who did it..

6300-6500 for turbo wosser piston and rods ordered straight from rcc... Then 2300-2500 for rest of parts and build and tune. I honestly can't tell you exact prices have to go find my receipts. We ended up getting 300hp on 16-17 pounds of boost on pump fuel.. Anyone else running 300hp how much...

So i ended up getting my build done by sabin performance in Dallas TX. He did my r1 and my busa turbo bike and i was always happy with him so i decided to have him do my turbo. We did stage 1 and added, wosser pistons, rods, spacers, studs, stainless steel valves and springs, bearings and...

She is home at least I got to see the dyno.. Brother says best thing he has ever rode. He def knows how to rub it in.. Ill post dyno chart and pics here in next day or so...good news yam Still running good few scratches and broken turn signal. Frame sliders did their job

So i ordered my rcc turbo kit about a month ago. I dropped it off to my installer about 2 weeks ago and i'm like a kid on x-mas waiting for their call. While the busa has been at the shop i have been riding around on my r1. So tuesday i'm at a track day (course not drag) and the guy in front of...

I'm going through the same thing myself. I'm getting my turbo tuned for 300 hp also and have been wondering on gearing. I was running -1,+2 before turbo and have since decided to change back to stock gearing. I'm also curious what tire you fellas are running on street. I have always ran q2 but...

I just ordered the rcc stage 1 turbo. I was told the stage 1 can run 400hp. I talked to Richard at rcc and told him I planned on running 300hp. He said to make my motor safe I should up grade my pistons and rods. He suggested wosser. My builder suggested upgrading valves and springs also so I...

My turbo should be finished in the next week or two. What combination of sproket and chains are you guys running on the street. I'm at a 4 inch extension and should be pushing 300 hp at wheel on my rcc tubo. This bike will mostly be used for street riding and the occasional roll on race... I...

I spoke with cheese he can't get me in until November after the Texas mile rush... Any1 have any experience with Sabin performance in Dallas or cycle works in ft worth. Everyday I walk past turbo in garage and I feel like a kid all over again! The wait is killing me. Any1 with 1st hand turbo...

It came thanks RCC