Recent content by TTF Turbo Fighter

Hi mate. I 'm building two bikes... One is streetfighter turbo and one extra roller chassis for drag use only with the same engine.. I have Gen2 front forks and i want to turn them doun to 52mm at the lower triple tree for more lowering the front end...

I was build a street fighter turbo and didn't want the big stock Gen2 cluster...

Sorry, i made the harness adapter a couple of years ago for my Gen 1 street fighter turbo but i don't have finished yet.I swapped to GenII ecu and electronics. I had test the harness adapter and the K7 gauges to a stock Gen2 busa of a friend and was work ok.The only think i didn 't test was the...

https://www.hayabusa.org/forum/threads/this-is-the-gsxr-1000-k7-k8-gauge-cluster-swap-pins-for-genii-busa.195028/

This is the GSXR 1000 K7 -K8 Gauge cluster swap pins for GENII Busa.

Hi there, does enyone know if i could mashine down the Gen2 front forks to 52mm like Gsxr 1000 forks to use with DME offset clamps that is 50mm top and 52mm down? Is it safe? Or i have to buy and turn down Gsxr forks? Gen2 Busa is 50mm O.D. top and 55mm down Gsxr 1000 2006 is 50mm O.D. top and...

Thank you for replying.:thumbsup:

Thank you, sir ... I wasn't sure about that.

Hi guys, Does anyone know how much oil need to remove from the stock capacity when you internally lowering the front forks? I have two sets of forks, One it is lowered 1'' from stock for street riding and the other 2'' for drag racing. Thanks in advance.

Hi guys, Does anyone know how much oil need to remove from the stock capacity when you internally lowering the front forks? I have two sets of forks, One it is lowered 1'' from stock for street riding and the other 2'' for drag racing. Thanks in advance.