Recent content by trevor

Tim said that reducing the washer to match the thickness of the bearing and two washers was the right way to reduce the endplay :) once he got my email he answered very promptly. I am very pleased :)

Tim just replied tonite, he said he has been having trouble sending and receiving emails. I just resent my question. I am confident that the issue will be figured out. I'm relieved that he is still around:) was a bit worried. I will post the results

The old setup just used a thrust washer..no bearing. No point in it being there if there is no pressure on it. It wouldn't be called a THRUST bearing. The old washer setup had 50000kms on it. Just how I see it. Would like to know what Tim thinks. Or how much endplay users on here have

The old setup just used a thrust washer..no bearing. No point in it being there if there is no pressure on it. The old washer setup had 50000kms on it. Just how I see it. Would like to know time thoughts. Or how much endplay users on here have

I'm thinking the t6 adapter is making things more confusing for me. I don't have any power adders so I could probably dumb it up a bit!

So you just run the static springs.might no springs on the arms? No weights? What kind of 60' are you running? I've had a best of 1.44 60'. Been a bit inconsistent but more than likely cause I keep frigging with it! It has been wanting to wheelie out at the tree

Are you running the t6 adapter? I've been trying to contact him every way possible. What rpm do you lleave a? From what I understand, I am gonna set it up to leave around 4500-5000rpm, t6 adapter with 3silver and3purple springs. And the 6orange static springs on top. And 4washers a nut and...

Tried to contact tim on Facebook..hasn't responded..got a new center bearing spacer made up at machine shop today. 0.014 thinner than the one I had, now it's the same width as the 3peice bearing assy. Will install tomorrow and see how it works. I sent him the first email on April 15. I really...

It does suck..and really seems like a great product..really needs to be some instructions and basic tuning outline. Hopefully it all works out

Does anyone else here use one? I would assume everyone with this setup would have the same large amount of end play..but like I said I'm not able to confirm this. With just the thrust washer assembly everything is within spec. I don't see any reason you would want the additional end play when...

Does anyone have any experience with the prostreet clutch? There is. 0155" difference between the thickness of the bearing and two washers, and the thickness of the bearing sleeve..to me that seems to be where the extra end play is coming from. I don't want to modify it without talking to tim...

Does anyone know if tim Hays is still in business? I purchased a pro street convertible clutch from him last year.. And need some help. And parts, but have tried emailing and phoning him with zero response!! Is he still around? My outer basket endplay measures 0.022 ". I've read it should be...

Hey guys, I'm looking for some help for a starting point for sprockets. I have an 05 with a carpenter 230 kit. 230 rwhp. I have a macintosh 7 over arm. Air shirt, launch limiter, and I am just finishing instead a new Hayes convertible clutch. Do u think 16f and 42r is to much gear.. Or should...

not where the paiu plug on the right side when the pair valve is deleter actuator valve is.... it actually looks the same as the hole or spout that is plugged when the pair assembly is deleted

hey guys, I have a gen 1 busa, modded.. pair valve removed and block off plates. i noticed today that the is a hole on the lower front of the air box, in the middle...it looks kinda like a drain hole. should this be plugged or is it infact a drain hole. Its at the very front...