Recent content by stratblue

Hi All. I've been putting the Busa on the trailer a bit lately and with my less than dexterous fingers I have been finding it hard to thread the ratchet straps through the tiny gap between the tank and the frame so I came up with this if it's of use to anyone: It's just a bit of M16 threaded...

Here's one for your consideration:

If anyone else has this problem, use a hair drier on the two outside inlets, get them looser then you can wiggle the two inner ones off.

I found this guy's blog, it's a funny read: https://tehben.com/2018/04/15/5-wtf-hayabusas-you-can-buy-right-now/ https://tehben.com/2018/07/09/5-even-uglier-suzuki-hayabusas/ https://tehben.com/2018/09/06/butt-ugly-bikes-iii-the-hayabusa-ing/ https://tehben.com/2018/11/26/wtf-hayabusas-part-4/...

Hi All Found a nicely modified Busa, not too keen on the colour scheme but it looks nice: https://www.autoevolution.com/news/custom-nick-anglada-hayabusa-floats-on-invisible-wheels-photo-gallery-51146.html?utm_source=ae_self&utm_medium=ae_moreon&utm_campaign=ae_moreon_news_static#

Hi All. I'm trying to get the airbox off a gen 2, I've undone the allen bolts either side that loosen the rubber boots on the inlets, probably 20 turns but it seems to be set solid on there. It wobbles but can't get it off, any ideas? Nick.

Hi there. I thought some of you might appreciate something I stumbled upon, you've probably seen it here, I certainly can't unsee it. Must be the worst custom Busa I have ever seen. Someone usually chips in with something to the effect of "There's a lot of love gone into that" or something...

Hi All. I have a 2018 Hayabusa Z and the fuel gauge stays full most of the time then plummets to empty really quickly, is there a way to get it a little more progressive? Thanks.

Cool, thanks, the guys at the shop gave me some extra weight just in case.

Can't see a specific picture forum, took a couple yesterday as it happens, so here it is! https://photos.app.goo.gl/HaNFQ1g6c42nCV5R6 https://photos.app.goo.gl/HUVMMUN7TGHBZmpn7

Hi All. I've bought some of those super duper Garmin dust caps that link up to the Zumo 590 to monitor the tyre pressures and I've had metal valve stems installed but the guys at the shop have installed those 90 degree stems, will these be ok with the weight of the Garmin caps? Couldn't see...