Recent content by rich2kbusa

I am putting in an aftermarket fuel pump in my 99 and was wondering if I need an adjustable regulator, fixed regulator or no regulator at all is needed. Has anyone done this? Any help is appriciated. Also, bike is near stock and will not be used in any high hp applications. Thanks Posted via...

i have turbocharged busa that i recently messed up a piston in. i have the motor ready to come out and need to find someone to take it to or send it to. here's what i'm looking to do. -spacer gasket -better pistons -undercut trans -possible dyno tuning once i put it back in. i am located in...

well i just moved to Las Vegas about 3 weeks ago and have had my first major problem. took out the turbo busa, short run (no more than 1 mile) just a few burnouts and 1-2-3 shifts. got back in the garage and there was alot of oil dripping from out of the center of the bike. i took off the...

i am taking it Mike slowe, that is who barry from velocity recommended.

ok, did a compression test: 1-140 2-140 3-140 4-145 put new plugs in at .020" and it seems to be ok. i'm going to get it tuned on monday on the dyno hope for the best. thanks to all

just pulled the plugs seems that they are all blackened and smell like gas. none are melted. ?

should i use same plugs? or do i use a different heat range?

there is a miss all of the time using a pc2 know where there is a dyno around philly area?

i just finished installing my stage 1 velocity kit on my 2000 busa and i have already loaded the map they sent me. i had the bike out on the streets 1st, 2nd , 3rd and i had no issues, just seat of the pants rush of power!! then i took it on the highway 4th, 5th and 6th to the redline i was...

www.schnitzracing.com

heres my pb

i just finished installing the schnitz brackets and here are my thoughts: 1-i love the way it is hidden! 2- they could have spent a little more time on designing it to fit better. 3- i had to trim down one of the bolt heads for the kickstand bracket. 4- no the bottom fairing bolt must be left...

in profile

while riding this morning the FI lite came on and the bike started to run like crap and eventually stalled and would not restart. it seems that i am not getting spark , nor am i getting fuel. i pulled the code and it is a C11. anyone know what this code means? or anything that could be wrong...

will be there from 3/1-3/9 room is secured by International speedway and A1A # is 484-368-7994 rich can't wait!!!!!!!!!!