Recent content by NearDeath

Loss of compression hurts, but it doesn't hurt that much if you ask me... I got a 20/40 sprocket combo and she is a little doggish off boost, but I am running a 20 in the front, so I am not sure I can really blame that on the bike... I had a 16/40 setup when I first built her and I thought she...

Hummmm. sounds like its a loose wire alright... I would check... 1. spark plugs, make sure they are tight and good. 2. I would go back to the wireing harness and check every wire one by one. (It really does sound like a loose connection.) 3. Check TPS make sure that is good to go. 4. Run...

I am going to need to get the map from my house, I can't find any of the old PCII maps out on the website... PM me your email address and I will email you the map shortly... There is an option on the PCIII software to improt a .map file which is the old style PCII maps and it will...

I see the problem... I use a PCII which has a ton more maps in it than that PCIII has available and naturally all the PCII maps seem to be gone... I will get you the one I was using and you can import it into the PCIII. The PCIII will automatically convert it for you, you just can't go from...

Dude, the map is in there... Let me download it for you and I will give you the map number... My setup worked great...

I had the same setup... It comes pre-loaded with a stock map, not a YOSH map... ;) The best map that worked for me was the yosh full race exhaust, K&N filter, and Yosh CAMS map. Once you load this map, lean it out a bar using the tuning buttons on the middle zone. The CAMS map will be too rich...

Relocating the fan switch beleive it or not helped my overheating out quite a bit which surprised me... The water wetter with distilled water was the best coolant setup I have found and I have tried a few... I have an intercooler hanging in front of my radiator, so heat has been a battle for...

Yes, for sustained boost... YOu are going to need something to cool the air intakes... Don't take the chance... ;)

Little too technical for me... ;) I just went with the manufacturers specs for my engine build with turbo system, and then had a damn good mechanic do the engine work.

GMBusa, you still wanting that extra 1 psi or are you pretty satisfied with where you are at... ;)

You bought yours already built... If you would have started from scratch, we would see what you had to say then.... lol.... Glad its working well for ya... When they run, they run great don't they... Once I finally got mine working right, I haven't really had any problems with it, but I am...

I got the 8 to 1 setup with RCC Stage II Super Street here and basically lowering hte compression is going to allow you to run more boost on pump fuel as well as high octane fuel. 8 to 1 is security, and possibly more boost down the road... In my engine, we got... Corrilo H-beam rods JE...

hahahahahahhaha.... Close dude...

I specialize in .NET and Java technologies, but I am sure I could drum something up for you in PHP, if there are no other takers... Don't need any pay... But I would like my scream name changed if you could do that for me... Cloud

I wish I was the one in the pic turning the chicky's head...