Recent content by Kripley

I was able to get the FI code to show up on my '14 by connecting the white+red wire to the black+white wire in the 6-point connecter. But it may not be this way for all gen2's because the set up for the connectors on my '08 vs my '14 are different. The '08 has only 1 white connector (6-point if...

Not quite sure why I didn't mention it, but I did this last night just before modifying the top piece down to make everything flush to lower the height of the screw on the battery, but everything came back normal. Battery was good at rest, on the initial start up, and while running. Pushed it up...

I feel like an idiot now for not even thinking about looking up the tool that is actually meant for this to see what the connecting end piece looked like.. Though that specific one looks like it was designed for the '08 even though it still fits other models, as that connecting piece looks...

I think whats getting me the most is I am not sure which plug I should be using for this because there are 2 in the spot that the 2008 only has the 1. When comparing them to what others have shown online as far as how to read the code, they both have attributes to what Ive been seeing/reading...

On the ride home today my FI light came on and the bike started to act up (jerking, electrical problems). I pulled over, turned the bike off for roughly 30 seconds, then tried to start it back up again. It didn't want to start, as if the battery was low/almost dead. I waited around 5 minutes and...

Update (better late than never..): First I checked all the nuts and bolts. Everything was to torque specs and it was still happening. Second I replaced both kickstand springs with my '08 Busa springs, and that fixed the problem. Thanks everyone who replied with suggestions.

I haven't had a chance to put it up on the stand yet. I am pretty busy throughout the week with school, so I planned on doing it this weekend. But wanted a few things ready to check beforehand. In the meantime, I guess I will tighten the nut more in hopes of preventing it from happening until I...

I have recently been having an issue where the kickstand has been coming loose on bumpy potions of the freeway/highway and lowering to the point of engaging the killswitch. When I checked the kickstand out I compared it to my '08 Busa; everything seemed normal, and all parts are secure/tight...

I know what I'm wanting done for the most part. Just not all the specifics on the best products/services to get it done. Been riding for 10yrs now (never owned anything with 4 wheels yet :laugh: and don't regret it at all - Im 26), and a busa owner since '08, just never really had the time or...

Thanks for all the suggestions and the help. I am very much out of my element when it comes to all of this. With the help of sixpack577, I'm now looking at Akrapovic cf dual full exhaust system (Im a fan of the dual pipes look), and an ECU Editor. Rather then the PC, ECU flash, and r-77s. When...

A little background, I am not exactly a new Busa owner, but new to the world of mods. I got my first Busa (black/orange gen2) back in '08, but unfortunately was hit on it about 2 months after getting it. Since then i spent some time working on restoring the fairings, shortly after I joined the...