Recent content by jurae

I want to thank all who sent their advice and especially Doug from charlotte and SoCal... yeah cal I did change the cylinder but I put the chinese levers back on and for some reason my 2nd master clutch cylinder went bad also. I replace it with another one and with oem and now everything is...

But the oem that I had in for 6years was doing the same thing! if the lever dont work then i will order the oem clutches!

I used KG Clutch Plate Kit KGK-8009S Suzuki GSX1300R Hayabusa (99-07) from Schnitz Motorsports

I found a old stock lever for the clutch. Well try it today and post the outcome later.

It started when i was using Mobil 1 Racing 4T 10W-40 Oil then I changed the whole clutch system when the problem started and used Castrol Power RS Racing 4T with Trizone Technology but the problem continues, However I never had any problems before using these oils. The only thing I can think of...

Pull the throttle and the rpms goes up with no catch then it catches probably 2-3 sec later

Power stays the same

My problem is with a gen 1 (06) clutch slippage. Originally started out thinking plates were worn, so I replaced them with heavy duty clutches and 3/3 springs (3 new oem springs and 3 40lb springs). Took out for test ride and all seemed fine at first and then I guess it got warmed up to a good...

I am trying to install a glow shift air gauge on my hayabusa that has a arnott air ride. When I ordered their air gauge system, they sent me directions that goes to a harley so I didn't intall it. However, I now have a glow shift started to install it and now I am at the final stage and the...

I have two custom choppershop that say they can build it but refuse to give me a ballpark figure... They seems kind of shady in the Tampa Bay Area so I am going down to Miami this weekend to talk to a couple of shops. I thought C&S built it but they never return your calls!!!!

Do anyone know where I can get this done for my busa or purchase it? I saw this at Bike Week and the tag said South Carolina but I couldn't find the owner to ask questions about where to get this mod! So do anyone on here have a link or know no where I can get this mod?

2 brothers, I was told at lowes to put a grey wood stain on the pressure treated wood first and after that put the skid not on top and then put the gloss down with some anti skid mix in. I wonder how that will work? It really seems like a lot of work!!!!