Recent content by hypojam

  1. H

    Racetech fork springs, spacers or not?

    Do people normally put spacers at bottom of springs or at the top? Cheers
  2. H

    Racetech fork springs, spacers or not?

    No spacers as such just stacks of washers. Racetech springs are 250mm
  3. H

    Racetech fork springs, spacers or not?

    Did they ever tell you the info? Thank you
  4. H

    Racetech fork springs, spacers or not?

    You are my hero
  5. H

    Racetech fork springs, spacers or not?

    Yea will be fitting the springs myself. If anyone could grab the info for me it would be massively appreciated! :beerchug:
  6. H

    Racetech fork springs, spacers or not?

    Hi, does anyone know if the racetech fork springs are correct length or do they need spacers made up? Thanks
  7. H

    2014 Very Soft Front Springs... Normal?

    I've ordered a 15.2kg shock spring(15.6 was recommended but only available as 15.2 and 16.1) to go with the new 1.1kg springs on the forks. Do the racetech fork springs go straight in, or does it need spacers calculated and cut? Thankyou
  8. H

    2014 Very Soft Front Springs... Normal?

    Is the rear shock re-spring a necessity? Feels pretty good to me and can easily achieve the required sag. Ktech dont list fork springs in those specs which is frustrating
  9. H

    2014 Very Soft Front Springs... Normal?

    That's perfect thankyou. Ordered the springs, spring compressor, damper rod holding tool and some 5w fluid. All ready to go hopefully. Anything else you think would be useful to know or have?
  10. H

    2014 Very Soft Front Springs... Normal?

    Down the south east England in kent
  11. H

    2014 Very Soft Front Springs... Normal?

    Anyone know where I can get some 1.1 springs in the UK? Thanks for the help. Much appreciated
  12. H

    2014 Very Soft Front Springs... Normal?

    Ah ok. What springs should I get do you think?
  13. H

    2014 Very Soft Front Springs... Normal?

    Hi, Trying to dial in my suspension sag on my gen 2 busa. The standard rear preload setting seems about right with 35mm of rider sag. The front forks were very soft in comparison with over 50mm on standard settings. I've wound the front preload down nearly all the way and am now around 40mm of...
Back
Top