Recent content by hayabusa317

Also I have thought about the ignition wiriing myself, all seems weird. Could it be the ECU? I do hear the a pump relay goe through its cycle. Maybe it has a issue in insulation when sending the 12 v signal to the pump??? The shop will look for this I am sure

There is no history of water damage I am aware of. I have owned the bike for a long time now. Never wash it, hand clean. And never ride in rain. The air shifter areas I did myself, and patched my own work. I did mention all of this to the shop. The one hot wire on the fuel rail I was...

Anyone with some experience with this please share info. Basic run down, checked all wires I can find. Tank off the whole 9. Removed fuel pump,"new". Old pump still works. New starter, new starter relay. Have not replaced the fuel pump relay, though I did test it out with meter, and it gave...

Having issues with my fuel pump not priming. Have read how these items are very helpfull

Tell me where you got this gregs haness and petrik software? Thank you

Looking to replace the chain and sprockets on my 1999 Busa. I have the service manual, and want to try this myself. Have worked on many things before, but never a chain. Can someone walk me through the pitfalls, and things that make it easier. Will have to order a kit, and the tools...

What Brake pads are for the 1999 Hayabusa? EBC has so many to choose from that can go on the bike? Organic or Sintered? Go with stock pads? If anyone can help with part numbers or model ones I would appreciate it. Local Dealer told me they put EBC FA 188HH on the Front? That...

Such a bonehead move. Put a full airshifter system with dyna light and all. Forgot to attach cable to key in rear before I put the cover on? Anyone ever do this?? And what can I do to open it without having to cut the cover in half to get access. Then buy a new cover as well. Have some...

Wondering if someone can tell me a good place to mount this unit. It is small, but having a hard time finding a place to put it.

Was talking to MRE airshifter company and they told me to wire in the air kill to the hot wire on the fuel injection? I traced a wire that seemed to daisy chain all the fuel injectiors. It is the yellow and red wire. Hoping someone here has experience wiring one up. MRE told me to make...

Got a air shifter kit from a friend he is out of state for my hayabusa, he had it on his. Can not get ahold of him, I have all the parts. MRE stuff compressor so on.... Been looking on computer to find information on installing one. Really do not sure how the wiring and hoses work on one...

For anyone needing to install one of these here it is. Take apart the factory kill switch housing that is already on the bike, near the front brake lever. Be carefull not to put too much stress on the soldered connections on the bottom of the switch when taking it apart. If not you will...

I Have 99 Busa, tips please for PMR. Bought the unit with one switch. Still on its way being shipped. Have the bikes kill switch housing apart. Anyone with experience to tell me how to wire it up? I have the service manual, and know where the wires go. There are two of them, one is...

Wondering if someone on a 99 Busa can give me simple instructions on how to install on of these. Physically I see where it mounts, but save me the time and tell me what wires to use. Thanks

Going to change the water pump on the bike, have a leak there. Bought a complete water pump. Rather than dealing with the mech seal if it had a issue. Any tips, I have the service manual. Going to drain the fluids this week and go from there.