Recent content by Ghost23

The Busa is going to win every time when it comes to riding in the twisty's, and ease of upgrading. The ZX-14 goes straight really, really fast, and has much better braking. So, it comes down to rider preference...and for me, the only thing a straight line can do...is take me to somewhere...

Yes...definitely!

I am writing this as a positive review after having my ECU Flashed by Powerhouse Motorcycles. It's a HUGE difference in performance. The price was great...$60 with shipping, and the turn around was really fast. They received it on Monday, and I had it back on Thursday. You'll notice a...

Next time just remove the fuse cluster, turn the bars to the left, and you're good.

Me and my boys will take our Busa's up in the Canyons or the track against any ZX-14! Turn? Are you kidding me? The 14 turns like a heavy Katana. The 14 has extremely heavy steering in the corners. I've ridden several, and even with the suspensions dialed in, they just can't flow like the Busa!

Is your neutral light flashing or inconsistent? If so, it's likely your Gear Position Sensor is failing. Try putting the bike on the Rear Stand, and try to start it with the kickstand up, and then down...see what, if any changes occur.

So, the problem came back...and guess what? It was the Gear Position Switch behind the Clutch Basket all along. It was failing, causing the Kill Circuit to engage because the bike was "thinking" it was in gear with the kickstand down. If anyone has their Neutral light flicker from time to...

Get the BUSA!!!! My wife is 5'4" 120lbs, and she LOVES it! We do runs up to 3 hours with no issues. Install higher rated springs for your weight if needed, and get your suspension set. I ride canyons, so no Fat Tire set up for me. If just commuting, a recommend Michelin Power 3's. They...

My post keeps disappearing...I am very interested in this, how do we start? Contact me please.

It vibrates, causes the drive train to move a little. If you want to check to make sure you're not engaged...CAREFULLY try to hold the wheel still by hand. (it should be going slow enough not to scare you) If you can, it's just the vibration. If you can't, you're slightly engaged. Also, to...

How do we get started?

I am interested, need the info on payment method, address, etc.

LMAO...it WAS the last placed I looked! After the guide took me to all of the sensors and relays...arghhh..... Can you tell I hate electrical?

Flatland...thanks for the tip! I actually took the switch apart, and found an issue. The securing post that is part of the upper half of the housing had broken off. So, the switch was moving around, and the broken piece of plastic was bouncing around inside. In addition, the contacts were a...

I just dug deeper into the troubleshooting guide. (missed this part the first time) I have continuity between the ECT and the ECM connectors, so the wiring is good. The Manual states that this indicates a faulty ECM. I was also curious that another thread in the forum stated that a bad...