Why not just buy a newer tank and pump assembly. I did it and have had no problems. Wiring is different but using plug from old pump and gas hand I spliced wires to new tank and plugged into old wiring harness. The only thing left is the fuel line. I relocated the fitting on the fuel rail to the...
any ideas on what i should do with the vaccum line from the old fuel pressure regulaior? Should i just block it off? This is the last thing I need to finish up
I am going for reliability. These 2k pumps are junk and everyone I have talked to said the same thing. I figured all I needed to do is change the plugs just wanted to make sure before dropping the money. Found a 06 tank and pump locally with reasonable price. Does anyone know the wiring on the...
Ok guys thought I had it all worked out with my 2k busa. Stuttered really bad when I bought it and I read on here about fuel screens. When I put it back together the fuel pump was bad. I talked to a guy at a local shop about switching to a newer tank with internal pump. He had done this but he...
been thinking about switching from the 99-00 set up to a 01 and up tank. Any one on here done this before. Not switching harness and everything just putting newer tank and pump and splicing my harness to fit. If anyone has done could you offer any pointers such as wiring etc.
Did the mod now the fuel pump is shot. Go Figure!!! First decent weather in weeks and I have to take out the wifes gsxr 750. Cant find a used pump right now and new ones are overpriced. What about aftermarket pump. Dont want one for extra hp just reliability.
You can just call C&S they probably have the stuff you need and once they get the arm done, you could probably trailer bike down and they will install. They have everything there chain etc. Super nice guys. Not really that far away either.
Mr Brown I saw those springs at an napa store the other day. They were in the cart where they cut the hoses off the rolls for customers. By the way, are you running a filter on both lines from the tank. I know it sounds like overkill but better safe than sorry.
Ok found the problem with my 2000. Had the same problem as many others on here with rough idle and hesitation at low rpms. Removed the fuel pump after running fuel injector cleaner through it and letting it soak for a couple of days. Found that the fuel pump was so old it looked to be breaking...
Does anyone have a map they would share for a 2000 model busa with pc3 usb. Has a muzzy full system and the power commander website doesnt have any thing even close. There is a local shop who will do a custom map but for some reason bikes always run worse after leaving there
Noticed you are in Tennessee. You should check out null
I have a 12 inch arm on mine but to be honest I have installed their 300 and 240 swingarms. They actually build most of the arms you buy from alot of the big name shops that advertise them as their own. I can get you one for well under that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.