Recent content by FanaticalKilla

Check and see if the factory rear shock has ever been swapped out. As someone had already touched on. Super fun bike to ride.

Haven't touched it for 3 years.

Yes to run a PC III with a map switch you need a mutilfunction hub.

The o-ring side is orb, the other side is compression (push to connect).

Yup let me know if this works becuase my top triple is scratched and needs powder coating or replacement.

Anyone know the pipe diameter on a 99-07 Akrapovic full system? I got a titanium full system coming but I have a friend that will sell me her carbon pipe off a Gsxr 1000 K5.

Yep set at about 1200. Will a fuel pump quit and then restart that fast that I can drop a gear and it will come back? Also checked today battery connections are tight and it is charging at idle and at 4000 rpm.

Well over the past couple rides two times it's died in sixth gear. Driving at about 4500-5000 rpm. It's getting parked right away so it's not a big deal. I think the fuel pump is caving. But who knows no fi light.

Handle bars, you mean the bar mount?

One of the most popular Busa modifications is to swap out the stock exhaust cam for a stock intake. The intake cam has a higher lift profile than the exhaust for more flow and power. The main problem encountered when doing this mod is that the intake cam sprocket has to be installed in a...

Pulled the pump apart the other day and found a ton of crap around the bottom. I bet this was my issue. Just waiting for a thermostat and I'll get to try it out again.

Nope, nothing.

I went to leave town tonight got out on the highway and hit 1rst, 2nd and 3rd gear pulling through and was around 9200 rpm and the bike basically just fell flat on its face. Underneath 9000 rpm the bike screams as it should?

19x20 would be perfect on a Busa. 19x18 would be a bit small. The numbers are input vs output if you wondering. 19x20 less input for more output, 19x18 is the other way around.

I'm looking at buying one soon here, when I finally get my garage.