Recent content by Dansch06limited

I bought a set of gauges for my hayabusa build & after they arrived i seen these 2 boxes mounted on the back. They are actually mounted to the gauge stay/ bracket. I've had a few types of illumiglo type gauges & these have them as well but I know these boxes are not for them. Does anyone know...

I'm no electrician so I couldn't make mine from scratch without knowing how it all worked first. I bought the kit from xdcycle (worst experience ever) that spinwurx made, actually I ended up findin out spinwurx stole the idea from raw designs & they got caught. Needless to say the pucs I bought...

Here is a pic I have to show the piece inside the wheel that the puc sits against. The brushes contact this piece to provide the power to the lights and the wire you see coming off this one is what you attach to all the positive led wires. The negative led wires attach together and you ground to...

i see there hasnt been a reply on how to mount these leds inside the wheels.. I have done this myself and I can tell anyone interested that it is alot of work.. But if you want more info on how to do it just send me a message. I will come back on here in the next few days and post pics of the...

Good point. i dont know why but I shouldn't give them anything really, instead of 0 I just put 1.5 and if I had to find something positive about the entire experience I might say that the website was easy to navigate and find parts. But what good is that when they sell crap?. I am going to...

Just wanted to update this " REVIEW " about XDcycle and let you guys know the kind of service you should expect from them. On a 1-10 scale I rate them at 1.5. They are by far the worst company I've bought parts from & customer service is non existent with these guys. I bought a wheel led kit...

Hey your video is set to private so I cant see what your showing in it but both the spacers are in fact different on an RC wheel than a stock hayabusa wheel. The bearings OD & ID are both differnt and stock spacers will not fit into the bearings on the RC. I tried finding a bearing with the ID...

Ok man thanks for the info

I have a 2003 hayabusa that I want to put chrome master cylinders on & found a set that are for the 08-12 Hayabusa. Are they interchangeable with the 99-07? Seems like they would be but since some parts around the front end of the Gen2 is different I wanted to check with you guys on here first...

Dansch06limited has entered a new Hayabusa in the garage. Go check out their 2003 Suzuki Hayabusa Na!

Hey everyone, I dont post much on here because I usually find the answers i need in previous posts (thanks for all the info btw)... but this time I cant seem to find any specifics to help me figure out my problem. First off, the bike feels like it loses power at 2500 RPM all the way to 4000...

You were right.. Thanks man :beerchug: I can't believe it was something so obvious yet never crossed my mind ???

So I decided to go with NGK iridium plugs this time, after I received them in the mail I went to pull the old ones out and when I compared them to the new ones.. they do not match up. But the part # on the plug is what people on the forum had said goes in a gen 1 hayabusA. I must be missing...

So I decided to go with NGK iridium plugs this time, after I received them in the mail I went to pull the old ones out and when I compared them to the new ones.. they do not match up. But the part # on the plug is what people on the forum had said goes in a gen 1 hayabusA. I must be missing...

Another old post I'm goinG to bump.. I can't get the new pads in the rear caliper, can someone tell me what I do with the double looking cotter keys ? I pulled it out already, but the two pins still hold the brake pad in place. What do I do to the pin in order to get pads out? I assume just...