Recent content by brutalstrength

Alright it's finally complete :thumbsup: I bought a new header on Ebay for $80 and gaskets from Schnitz Motorsports, Inc. for $20 including shipping. When I took off the old header I simply unbolted the radiator and moved it back a bit. This gave me just enough room to unbolt the header. The...

:beerchug: Thanks for the offer. I actually do need the right side mid pipe (if sitting on the bike)in case I ever want to throw the stock cans back on. How much do you want for it? I take it with any new install I will need new gaskets as well? Are they pretty standard gaskets or should I...

yeah I'm going to have to buy newer model header pipes. The inner pipe of the midpipe (where I cut) is way too small. Do you know if a newer model header will fit an older model? Say if I buy a 2002 header, will it fit my 01? I'm not sure if they changed them that much.

I had the same issue with my 01. I'm going to put shorty's on and noticed only the left side was clamp. I cut the right side last night and am going to try and modify it my own way. If i can't clamp around the inner pipe on the right side I'm going to weld a piece of smaller pipe to it. I'll let...

Yes it is 100% stock. I took off the can and shined a flashlight down the midpipe and saw there was an inner pipe so I sawed off the midpipe in the same spot the other side met the header pipe. I'm going to try to dremel around the midpipe and then try and clamp to the inner header pipe. If this...

Hey everyone. I bought THESE shorty pipes online and figured the process would be quick and painless. The pipe on shifter side had a simple clamp to remove and from the can to the heder came off. I checked out the brake side and there is no clamp. The pipe runs from the can to the header...