Recent content by AndhiSatria

  1. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    OIL ROUTING. Guys., Is the picture on the RIGHT SIDE is confirmed the best way for OIL ROUTING for HAYABUSA GEN-1 Engne ? PS : Using the RIGHT PICTURES, do I TAKE-OUT the blocking plug on behind the oil-filter, OR LEAVE IT IN Thank you very much for any comment on this....
  2. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    The Daihatasu Sirion is a city car with Front Engine and Front Wheel Drive System. We decided to convert into Front Engine and Rear Wheel Drive System. Initially we wanted to run Independent Rear Suspension (IRS) Set-Up on the car. We were thinking of getting a ready to bolt on Independent...
  3. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Still working on the ROLL-CAGE., Pillar-A and Pillar-B is DONE. Roll Cage has been painted and FINAL WELDED to the chassis. Front Pillar-A Roll Cage is welded to the car Pillar-A front windshield frame. Pillar-B Roll Cage is welded to the bottom chassis. Creating additional support...
  4. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    OFF TOPIC., Offroad Racing is my passion, I race long time ago and then with Dana Karya of www.dssgarage.com specializing in suspension set-up (Coilover from Kingshocks, Radflow and any other coil-over shocks), then built full tubular race car. I have been working with Inline-6 Jeep from...
  5. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Hayabusa Gen-1 HOLESHOT ENGINE has been placed inside the engine bay of Daihatsu Sirion Hot Import Nights (HIN). It is a Small city car !!! As you can see, the engine sits quite low in the engine bay. This is what we wanted, to have the Hayabusa Gen-1 from HOLESHOT RACING sits low This way...
  6. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Thank you very much .... Thank you very much .... Yes, it would be a rear drive car Yes, you are correct, the engine has been slightly moved to the left side. If I moved the engine to the right side, it will interfere with the Steering Arm, as the rack and pinion are located at the back of...
  7. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Installing ISC COILOVER on Daihatsu Sirion for Rally / Racing Concept : To use daily city car common in Indonesia ie. DAIHATSU SIRION Modified for ROAD RACE TOURING / SPRINT RALLY Extrerior looks has to be original Interior looks has to be original using standard Dashboard, except A/C If...
  8. AndhiSatria

    Hayabusa Gen-1 Oil Pan Modification For Car

    Noted, I have searched on this topics. Noted, I will take a look on this doc. Does anyone have perform modification to the oil pan with pictures please....
  9. AndhiSatria

    Hayabusa Gen-1 Oil Pan Modification For Car

    Hayabusa Gen-1 Oil Pan Modification for Car Dear HAYABUSA.ORG As in my thread "Rally / Racing With Gen-1 Daihatsu Sirion (city Car)" I would like to ask specific questions about OILING for car use, as there are no-one here in Indonesia who knows about HAYABUSA engine. I will not use...
  10. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Installing ISC COILOVER CAMBER PLATE on Daihatsu Sirion Shocks Tower. Concept : To use daily city car common in Indonesia ie. DAIHATSU SIRION Modified for ROAD RACE TOURING / SPRINT RALLY Extrerior looks has to be original Interior looks has to be original using standard Dashboard, except A/C...
  11. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Thank you very much for your kind words and blessing. Soon when it comes to the HAYABUSA GEN-1 Engine, I surely going to asked lotssssssssssss of questions.
  12. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Removing the original TOP SUSPENSION Support Plate at Shocks Tower on the HIN DAIHATSU SIRION Project to make rooms for ISC COILOVER CAMBER Plate. Cutting the original TOP SUSPENSION Support Plate at Shocks Tower on the HIN DAIHATSU SIRION Project Cutting the original TOP SUSPENSION Support...
  13. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    Video #1 of the built process
  14. AndhiSatria

    Rally / Racing With Gen-1 Daihatsu Sirion (city Car)

    At the moment, I am just planning to have this car rrady for thesting bu end of November in its original engine. Once testing has been done, I might thinking of upgrading some parts, or move to TURBO-CHARGED. As for info, the engine has been mild modified by HOLESHOT RACING - UK...
Back
Top