Recent content by 3505panther

  1. 3505panther

    Ticking noise and I cant find it... please help

    I actually have had a similar situation and just determined the cause, the chain is getting caught on the rear sprocket, looking at the link showed a crack in the bard between the two side links. Took me a while to figure out what it was, I replaced the two piece clutch thinking that was it but...
  2. 3505panther

    Bad News!

    Wow, John I am sorry to hear that, good guy. Don't know what else to say but you and his family have my condolences.
  3. 3505panther

    GLOCK Handgun--Opinions?

    From the Blue Book: MODEL 23/23C COMPACT SPORT/SERVICE - .40 S&W cal., compact variation of the Model 22 with 4.02 in. ported (Model 23C, new 1999) or unported barrel and 10 (C/B 1994) or 13* (reintroduced 2004) shot mag., 23 1/2 oz. New 1990. Grading 100% 98% 95% 90% 80% 70% 60% MSR...
  4. 3505panther

    Be careful out there.

    :mad2:Just wanted to pass on a quick reminder to be careful out there. I just highsided my GSXR750 on cold tires and a bit of sand. Quick and painful. I try to be pretty careful and here in the Northeast a lot of folks are of the opinion that now is not a good time to ride due to the sand. I...
  5. 3505panther

    HID Headlight adjustment, high beam

    Thanks, I'll give it a go tomorrow night after riding. I'll let you all know how it turned out just in case someone else is wondering.
  6. 3505panther

    HID Headlight adjustment, high beam

    So thank you for the input. I did know where and how to adjust the light, the issue is that there is only a single adjustment for both the low and high beam. Once I had the low beam correct the high beam is not, adjusting for the high beam puts the low beam in the wrong spot. That is what I...
  7. 3505panther

    Pack job For those that tour show us your pics

    So once again I should have asked before I did anything. :(
  8. 3505panther

    HID Headlight adjustment, high beam

    After installing a HID as my low beam, I left the high beam stock. Currently the low beam has been properly aimed, but my high beam is too high. Since there is a single adjustment for both wondering if others have seen this and what was done to correct it. Currently my High beam functions as...
  9. 3505panther

    Rebuild has started!

    Nice job. I just hope I can keep up when you are done.
  10. 3505panther

    Pack job For those that tour show us your pics

    Of course I meant to ask, is there anyway of getting rid of this.
  11. 3505panther

    Pack job For those that tour show us your pics

    Does anyone else have an issue with scratching the sides of the tail using soft saddlebags? I did a few thousand miles with soft saddlebags and it looks cloudy on the sides of the tails section that the saddlebag was resting against. Of course it rained and this may have helped the problem along.
  12. 3505panther

    Need head light adjustment help…?

    Not to completely change the subject, but when you put in the HID, is your high beam now completely out of wack? Since there is only a single adjustment for both lights how do you correct this?
  13. 3505panther

    Good to meet you

    That is how I want to be remembered, thanks again to all of you.
  14. 3505panther

    Good to meet you

    Just wanted to post a quick note to say it was good to meet the folks I did. I think the .org does a great job bringing folks together. Sorry I didn't stay longer but I did want to get the "iron butt" run back and the weather would not cooperate later in the weekend. Sam, Chris, David, John...
  15. 3505panther

    buell pegs or rearsets?

    I have rearset on my GSXR750 for the track, Buell pegs for my Busa for comfort. The Vortex don't go down as far as the Buell but go everywhere else. It depends on what you need.
Back
Top