Recent content by 1UP

  1. 1

    2nd Gen. Fork Nut Correct Placement

    Great video and description. Thank you very much!
  2. 1

    2nd Gen. Fork Nut Correct Placement

    So does that mean the internal nut can be set to the maximum setting (no threads showing), and then adjustment can be made to the external nut?
  3. 1

    2nd Gen. Fork Nut Correct Placement

    I just replaced the fork seals on my '09 Busa and I think I may have incorrectly placed the internal fork nut. I just referenced another thread and it appears that the nut has to have 11mm of thread showing before tightening the nut. Will I be able to readjust the nut position with the forks...
  4. 1

    Gen. 2 Tight Binding Noise/click Left Handlebar

    I've owned the bike for the last 6,xxx miles and have only let it sit during the 4 winter months the last 2 years. I can't really think of any other details that I can give. It can only be felt in the left handlebar and only during very slow turns. It will "click/bind" 1 time then go away. I...
  5. 1

    Gen. 2 Tight Binding Noise/click Left Handlebar

    There are 9,xxx miles.
  6. 1

    Gen. 2 Tight Binding Noise/click Left Handlebar

    I'll check that out. Thanks!
  7. 1

    Gen. 2 Tight Binding Noise/click Left Handlebar

    Hey guys, during last season, I periodically experienced a "tight" noise/click while making low speed turns which also felt like a "binding" of something that is felt in the left handlebar. It isn't consistent with every turn I make and I'm unable to easily reproduce the problem but I know it's...
  8. 1

    Replacing factory 2009 Busa decals / color scheme - suggestions please?

    I have a concern with overlaying new decals and had a few more questions. Is overlaying of the new ones done to prevent having to do work to remove old ones? Is the thickness of the two combined layers of decals noticeable? Is the old layer of decal preserved and reusable again by simply...
  9. 1

    Replacing factory 2009 Busa decals / color scheme - suggestions please?

    This red looks nice. Do you mean to lay this set of decals right over the old ones without removing the old ones?
  10. 1

    Replacing factory 2009 Busa decals / color scheme - suggestions please?

    I've owned my first Busa now for about 6 months and have put on about 3.5k miles and am loving it! The factory white/blue/silver is really nice still but I'm wanting to change it up a bit or even completely (depending on cost, of course). I've tried Google image searching already but don't...
  11. 1

    How-to Gen II Marble Modification with pictures

    Here's another how-to thread with pictures on the "marble modification" to a Gen II Busa. I just did this yesterday and no more exhaust popping/backfire on deceleration.
  12. 1

    Time for new tires; Bridgestone Battlax T30 / Dunlop Q3 / Michelin Pilot Road 4

    Alright, just got the Bridgestone S20 EVO's installed and took it for spin. Feels good so far!
  13. 1

    Time for new tires; Bridgestone Battlax T30 / Dunlop Q3 / Michelin Pilot Road 4

    Alright, thanks for the replies. I think I'm actually going to get a set of Bridgestone Battlax S20 Hypersports. The set will cost me just under $170 after rebate and if they don't work out, I won't feel too bad. I also see that a few Busa riders go with 200/50 profile tires. The S20 is also...
  14. 1

    Time for new tires; Bridgestone Battlax T30 / Dunlop Q3 / Michelin Pilot Road 4

    There are so many to choose from and even more opinions - I'm just looking to get the best deal I can and at the same time, feel like I made the wisest decision for a safest ride possible. I only ride in a straight line until I'm forced to make a turn to follow my destination route and only...
Back
Top