Recent content by 00Busa

  1. 0

    Obama just spanked Mitt! You mad? LOL

    Man, I haven't been on here in quite a while, you guys have been busy !
  2. 0

    PC 5 questions

    Sounds like you guys have been having fun over here ! The other site is starting to get a little boring since they aren't beating up on me any more.:laugh:
  3. 0

    What kind of gas do you use?

    I use 89 non-ethanol whenever I can.
  4. 0

    To Mod or not to Mod ?? Airbox mod ???

    You are everywhere man ! lol
  5. 0

    I'm excited!

    Looks good EZ, hopefully we can hook up and get in a ride soon.
  6. 0

    Different Clutch Springs mod

    You definitely don't want to "remove" 3 of the springs ! With the "weld-mod." it should slip easy enough and HD springs will help with slippage on the other end. I use all 3-HD and 3 stock with BDE spacers.
  7. 0

    My Orange and Black K8!!!!!

    You guys got those '08s looking good. I may have to upgrade.???
  8. 0

    Kwaka Kreeps

    I've had a '06 14 and my brother-in-law has a '08 Busa. I've rode both on the street "HARD" and at the track. The 14 actually fit me better (I'm 5'7"/175 lbs)and I like riding it because of the "underdog" status when I go up against Busas. Don't get me wrong, I have a 2000 Busa (1440) with...
  9. 0

    Leaded Frt Axle

    Checked mine and it 2.4 lbs heavier-in conjunction with the 15 lb brick, I went from low 9.00s to mid 8.80s at SWB and picked up about 1.5 mph just because I could get on the gas quicker without wheelying.
  10. 0

    2008 Busa   1/8th mile times?

    If you do the clutch mod you definitely need HD springs or spacers. Make sure you put that last friction plate in correctly or they won't last long.
  11. 0

    Track Times

    8secBusa, I just read where you're still stock bore - I thought you were 1397 too. You're running extremely well to be stock bore. Your mph is close to my mph with a 3 mill in the 1/8th(125~127) and not off by much in the 1/4th(155~157).
  12. 0

    Over geared

    I'm around 10600~10800 rpm in 4th gear but I have an extended ECU so I still have a good bit of rpm left in 4th.I consistantly run low 1.50s 60ft ( ocassionally high 1.4s) and low to mid 3.8 330ft. I have a BDE brick/15 lbs.and almost 3 lbs. of lead in the front axle to help with launching and...
  13. 0

    Over geared

    Your're lucky the pin didn't try to lock up your cams. Be sure to measure the "height" when you put it back in.
  14. 0

    Over geared

    8secBusa - how much do you weigh ? I have 17/41 gearing and ran 8.868,8.885,8.911/high 155~low 156 mph(still stock wheelbase)but I only weigh 175 lbs.. Our mph in the 1/8th and 1/4 are almost the same so you are definitely making enough power to get there. I tried 17/42 and actualy ran 156~157...
  15. 0

    Nice ride today in Daytona Area

    I'll be there on the 6th for Bike Week.
Back
Top