Pc3 From Gen 2 To Gen 1?

Bluey2

Registered
Will a Gen 2 PC3 fit the connections of a Gen 1? Been offered one and if it connects I guess it is just a case of adding the correct map?
 
Went to the Dynojet website: The part # a 2007 Gen 1 PC3 is 312-411
A 2008 Gen 2 is 339-411. They wiring is different too, the Gen 2 PC3 has connectors for the 8 injectors.
 
Ok.......

So does that mean it may fit?

My understanding of the DJ part number is that it can either relate to the DJ installed zero map only, or the connetors and the map. If the connectors are the same then a later PC could simply be reprogrammed?
 
Ok.......

So does that mean it may fit?

My understanding of the DJ part number is that it can either relate to the DJ installed zero map only, or the connetors and the map. If the connectors are the same then a later PC could simply be reprogrammed?
The connectors appear to be different between the PC3 for a 07 and a PC3 for an 08, at least from the images I've viewed on google. I had one in my 07 Busa and I have one in my 08, the setups are different.
 
Back
Top