Go Back   Hayabusa.oRg > Performance > Turbo


Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 01-31-2009, 01:56 PM
Ryan Schnitz's Avatar
Rookie

 
Join Date: Jan 2005
Location: Decatur, Indiana
Group: Site Sponsor
Posts: 234
Default 1000cc Saturated Injectors now available!



Suzuki Hayabusa 99-07
Injector Kit, 1000cc, Suzuki Hayabusa 99-07 - Bosch
1999-2007 Suzuki Hayabusa

Bosch's newest generation injectors are now available in a 1000cc saturated injector!!

All of our injectors are sold in matched sets of 4. The sets are matched not only by flow, but by injector dead time. Very very few people are offering this kind of matching consistency. By matching the injectors based on both dead time and flow, you end up with a set of injectors that are matched to 1% from minimum to maximum pulsewidth. If you don't match the injectors based on dead time, you can easily end up with a 4-10% flow variance from injector to injector in the 2-3 ms range, where most of the life of the injector is spent. This can have a huge affect on idle quality and how smooth the engine runs.

Features:

*High Impedance, no need for injector drivers or injector resistors
*High pressure capability, All injectors will run comfortably at 100psi above 10v, flow will be increased by approximately 50% at 100psi
*High duty cycle, with a recovery time of only 1ms, all injectors will run up to 92.5% duty cycle at 9k rpm and 95% duty cycle at 6k rpm while maintaining linearity within 1%
*Excellent low pulsewidth response, linearity within 2% all the way down to 2ms, predictable response down to 1.5ms. Using a 3 dimensional battery comp table with Motec V3 software, low pulsewidth response can be linearized to practically zero flow.
*Good atomization, Droplet size of the 1000cc injector is comparable to the Siemens Mototron 60lb injector, and is far better than the Multec 95lb, Standard Motor Products (RC) 1000cc and Siemens 72 and 83lb injectors.
*Excellent consistency, no sets will require more than a 1% trim
*Ruler flat response, unmatched linearity means easy tuning and accurate compensations.

Designed to replace the stock 99-07 Hayabusa injector with no modification to the fuel rail. These will fit any fuel rail designed for stock or S2000 injectors. New injector connectors are included and will require cutting and crimping new terminals onto your wiring harness.

More Info - Injector Kit, 1000cc, Suzuki Hayabusa 99-07 - Bosch * Schnitz Motorsports Inc

______________________________________
Ryan Schnitz
Tech Advisor - Marketing - New Product Development - Dyno Operations
Schnitz Motorsports, Inc.
http://www.schnitzracing.com
800.837.9730
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Injectors MIKE R General Bike Related Topics 2 08-31-2008 12:40 PM
Best 1000cc bike The Fletch General Bike Related Topics 38 07-21-2006 09:51 PM


All times are GMT -5. The time now is 01:19 AM.


(c) 1999-2010 Hayabusa Owners Group