Swingarm For Sale, Gen 2

Discussion in 'Powerhouse Motorcycles' started by POWERHOUSE, Jul 29, 2017.


  1. POWERHOUSE

    POWERHOUSE Frank Site Sponsor Registered

    Contests won:
    0
    Messages:
    2,268
    Location:
    east coast
    This one was on the bike for only 300 miles, the customer wanted to go in a different direction. It is 6" over with the underbrace, only $600 . . . image1.JPG IMG_0836.JPG
     
  2. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Messages:
    322
    Location:
    DesMoines Iowa
    Great deal wish I was in the market right now!!
     
    RedBull likes this.
  3. POWERHOUSE

    POWERHOUSE Frank Site Sponsor Registered

    Contests won:
    0
    Messages:
    2,268
    Location:
    east coast
    For those that asked, this swingarm is almost mint. Take a look at the chain guide in the first pic, and you will see it was hardly touched. And
    yes, everything is included, all bearings, the axle, blocks, etc. This is ready to be bolted on . . .
     
    RedBull likes this.
  4. Mikew777

    Mikew777 Registered

    Contests won:
    0
    Messages:
    95
    Location:
    Batavia, ohio
    Is a different shock/spring needed to make this work?
     
  5. POWERHOUSE

    POWERHOUSE Frank Site Sponsor Registered

    Contests won:
    0
    Messages:
    2,268
    Location:
    east coast
    No. Typically, because of the extra leverage an extended swingarm can provide, some like to put more preload on the stock shock spring. If you intend on seriously dragracing, then a PRI or Ohlins or Penske would be called for. Most customers actually just bolt it up and go . . . the bike will feel a little "softer" that way . . .
     
    RedBull likes this.
  6. POWERHOUSE

    POWERHOUSE Frank Site Sponsor Registered

    Contests won:
    0
    Messages:
    2,268
    Location:
    east coast
    Yes, obviously you will need a longer chain !o_O
     
    RedBull likes this.
  7. POWERHOUSE

    POWERHOUSE Frank Site Sponsor Registered

    Contests won:
    0
    Messages:
    2,268
    Location:
    east coast
    I want this gone, the price is now $550 . . . . tick, tick . . .:banana:
     
  8. Blkoutbusa

    Blkoutbusa Registered

    Contests won:
    0
    Messages:
    19
    Man, that's a steal. If I hadn't just got the bike I might scoop this. Bearings and everything in it or swap over from stock arm / buy new etc?
     
  9. POWERHOUSE

    POWERHOUSE Frank Site Sponsor Registered

    Contests won:
    0
    Messages:
    2,268
    Location:
    east coast
    Bearings are in it. The only thing you need is the pivot sleeve (spacer) from your stock arm. Everything is there, everything is as close to new as
    you can get. This arm was over $1100 new, if someone does not take it for the lower price I posted, I might just hang it on the wall and put
    Christmas lights on it . . .:popcorn:
     
    RedBull likes this.

Loading...

Share This Page