Ride pics thread.........

Lake Hawea then lake Wanaka
20170221_152501.jpg
20170221_154916.jpg
 
Tony what is the power / torque of the 1400 ? Thanks in advance :) nice looking bike .
 
I'm guessing 112 hp at the wheel with 124nm torque from 2500rpm.

Mine had similar aftermarket open headers and muffler
 
A mate has a turbo 14 which he built himself, first engine (bone stock) lasted 15000kms before chucking a rod.
Second engine has carillo rods and a cam from the other motor and is going strong as, making around 220 rwhp.
It looks stock apart from the pod filter hanging out on the left as the turbo is under the seat, those with a keen eye
will see a spacer or where the 4 into 1 disappears and reappears. They are a low compression engine.
 
Wife n I took a little ride out today , and will do another tomorrow . Did let the bird stretch her wings a bit today with the Givi cases on .
GPS didn't quiet catch the 170 I was showing , but 3 mph off @ 167 is not to bad for no speedo healer . Just a 19 tooth front sprocket , and a 190/55/17 tire make the two nearly match unless its very high triple digits.

20170318_101641_HDR_zpsxaal1azl.jpg

20170318_122956_HDR_zpsjtai1st1.jpg

20170318_123007_HDR_zps2wspxvkc.jpg

20170318_123021_HDR_zps7vcylvuc.jpg

Screenshot_2017-03-18-12-30-30_zpstzjahx8e.png
 
Nice C10

I changed my rear sprocket down 2 and have a 190/55 and it's almost a perfect match with the Garmin.
But the Garmin can't change numbers as fast as the bike can. If you were just a quick burst up to speed and then backed down,
maybe it didn't have enough time to get the true speed. Then again maybe you did hold that speed and it's still off a little.

Now I'm curious - on a 20mph corner (like the sign in your picture) how fast do/can YOU take that 90° corner?
 
Back
Top