Ok, SCAVENGE PUMP OIL HELP!

[kawiboy11]

Ok, who runs a OIL SCAVENGE PUMP. The system I had came with it, & I am having a hard time finding out where and how to install it? Does anybody have this system, or use this pump? It's made by Mr. Turbo, though they only troubleshoot three days a week, for 2 hours! HELP

 

[NearDeath]

Yea, those turbos sit lower then some of the newer stuff...

Excellent install pics... Good luck.

http://www.suzukihayabusa.org/forum....g649303

 

[rocketgeezer]

Hey kawi; my setup isn't a Mr Turbo but I use the scavange pump he puts out with his kits the little dude works super [no oil smoke] you just hook the turbo drain port on the center section of your turbo to the inlet side of the pump it's a small hose fitting 1/4 inch the run the output side of the pump back into the motor I removed the cover on the back of the motor where the crankcase breather is and drilled and tapped it for a hose fitting and ran the pump output to this fitting and then just power the pump with key on power. like i said the pump works great I spoke with Terry when I got this pump and questioned it cause it looks kind of wienie but he assured me it works good and so far it seems to last.

 

[Uncle Bob]

errr, whats the problem? Inlet, outlet, and two wires (which ar marked on the pump body)

Whats the question?

 

[kawiboy11]

Ahh, I figured it out, thanks!