Oil leak from Magneto wires

[adsrshkdagur]

I am facing a peculier problem of engine oil leaking from the place where wires come out from Magneto cover rubber seal. The oil is coming at a rate of two/three drops in 15 days, how to seal the gap between wire and the rubber cover through which the wires come out ?

 

[sixpack577]

Take off the stator cover, there is probably a small amount of oil in there(normal), clean everything well, including the rubber grommet around the wires.
Use degreaser or rubbing alcohol, let it dry, then put a small amount of black rtv silicone in the grommet's groove that slides into the stator cover(and between wires if need be).
I would also use a new stator gasket, but you may get by with the old one.
Let the rtv set up over night, and it should be fixed.

 

[Berlin Germany]

I am facing a peculier problem of engine oil leaking from the place where wires come out from Magneto cover rubber seal. The oil is coming at a rate of two/three drops in 15 days, how to seal the gap between wire and the rubber cover through which the wires come out ?

in 80 out of 100 cases this is normal at all busas .

so leave it like that and use a rag every 14 days.

and how did you determine the number of drops?

left side panel permanently removed and then driven like that?

can you find these drops on the ground? no ? leave it as it is.
yes? follow sixpack´s desiption.