I screwed up and need help....

Discussion in 'Busa problems' started by BoricuaBusa33, May 4, 2009.

  1. BoricuaBusa33

    BoricuaBusa33 Formerly "oneilldn" Registered

    ::25 I'm stuck and need you guys help..... I took the tail off so I would have more space to cut the mud flap. Everything went perfect putting everything back together, and installed the Hump back on.
    Well, I went to open the Hump again and it won't open, at that time I realized that I tottaly forgot to hook back again the release cable. So now I can't open itttttttt:banghead::banghead::banghead::banghead:

    What should I do???? BTW, Yes I know, I'm an idiot...:whistle:
  2. BoricuaBusa33

    BoricuaBusa33 Formerly "oneilldn" Registered

    BUMP..... Come on guys.... help a brother out....:laugh:
  3. Mr Bogus

    Mr Bogus Trouble Makers Inc. Donating Member

    do a quick search... been covered a few times. :)
  4. BoricuaBusa33

    BoricuaBusa33 Formerly "oneilldn" Registered

    I did, and found a few methods... thanks a lot...::4. I just thought I was the only idiot to have done this....:rofl:
  5. Mr Bogus

    Mr Bogus Trouble Makers Inc. Donating Member

    You are going to have to work pretty hard to be the first guy to do anything with a busa... after 10 years, just about every crackpot screw up has been done at least a hundred times :) Lucky for us all, guys share the fixes too :)
  6. mike1180

    mike1180 Banned

  7. dadofthree

    dadofthree Seasoned Beef Donating Member

    Good Luck :thumbsup:
  8. Bansh

    Bansh Registered

    good info
  9. Busakid08

    Busakid08 Registered

    DONT DRILL - you can do it without drilling and a little patients, took me about 10mins but eventually got it with a coat hanger with teh side pryed up a little IT CAN BE DONE .... which is also scary cos you then realise that anyone can do it :(
  10. BusaWizard

    BusaWizard On a Steel Horse I ride. Donating Member


Share This Page