get my front fender off

[01busa1]

I got a carbon fiber front fender for my 01, The stock fender has a small bracket that holds the brake lines, does the clamp come off some way or do you have to remove the rivets? I just bent my reflectors out of the way, Need some help before I get a claw hammer.

 

[pure_ego]

you have to drill the rivets..

just use a small bit.. and uh.. you need to be careful not to drill your tire in the process..

I believe I had the front tire already off when I did mine.. but I'm not positive...

at the least you should be able to move the fender in an upward motion away from the tire an inch or two before you drill.

if that fails.. use the hammer... the hammer end.. forget that sissy claw part.

 

[pure_ego]

or maybe you can push the fender in a downward motion..

blah blah.. just don't drill your stickin' tire whilest damning the rivets.

 

[pure_ego]

stinkin' tire... although I hope it is a stickin' tire also for your sake in da' twisties.

 

[nitrousjunkie]

Alot easier with the front tire off!

 

[01busa1]

Thanks a bunch! I'll be careful drilling,