to burp it, you get it hot enough for the thermostat to open, then shut it down, the air will naturally work its way out. it takes a few heat cycles to get all the air out.
Carefully, very carefully lean the big girl right to left a few times. Open the radiator and fill if needed. Repeat the process until it's full. Running and let it cool off a few times checking the level. Then fill the overflow to the proper level.
Ok cool I was also out riding it around a bit too get it nice and warm. So I guess that took care of rocking it a bit. Now I guess I'll add to the overflow.. Thanks Guys
I had the engine ice in it before I went to Suzuki too get another half gallon. Temperature stayed at mid-range. Now since I've filled the radiator it gets just over midranger and the fan kicks on too bring it back down. I'll go out now and let it heat up and afterwards I'll fill the overflow.. Thanks dadofthree and ogre.. Its nice out here in Colorado riding season is here...
While we're on the process interigation topic. Did you flush the system with Distilled Water before making the conversion over to EngineIce?...
And where you wearing blue slippers?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.