Akrapovic Single Side Full Exhaust

Discussion in 'Motor and Exhaust' started by Mathewrussell52, Nov 17, 2016.


  1. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
    Bought bike with it on it could use a good cleaning and has some fading. Sticker has small chip out of it. $900 tyd

    IMG_6003.JPG

    IMG_6001.JPG
     
  2. Scooby315

    Scooby315 Registered

    Contests won:
    0
    Interested in any trades?
     
    Mathewrussell52 likes this.
  3. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
    Possibly selling this to complete my turbo build. The thought was to subsidize the cost.
     
  4. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
  5. FILT166

    FILT166 Registered

    Contests won:
    0
    Name:
    Mike
    That still has the baffle in it?
    What does the bottom of the headers look like?
     
  6. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
    Pipe is wide open tried to get a pic of it. All pipes are solid no rust just dirty as just finished pulling it off.

    IMG_6011.JPG

    IMG_6010.JPG
     
  7. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
    Price is now $700 to your door.
     
  8. FILT166

    FILT166 Registered

    Contests won:
    0
    Name:
    Mike
    Might sell my alien head 1 to get this.... But...
    I want boost also....
     
  9. Mike Chambers

    Mike Chambers Registered

    Contests won:
    0
    I think it might both gen 1&2. had yoshi full 4 into 1 on my 06 model and it did fit on my 2011 model. think it's possible to get sleeve that will adapt to both gen's. or custom one up
     
  10. Mike Chambers

    Mike Chambers Registered

    Contests won:
    0
    Following this point. I'm not inclined to believe Suzuki when they say parts aren't compatible , my 1980 GS1000SN I transplanted a 1981 Katana 1100 motor and swingarm on to it perfectly despite Suzuki Brisbane stating quite quite adamantly that you can't. proof in the pudding was riding it into show them what they say can't be done. Kiwis tend to make things doable
     
  11. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
  12. sixpack577

    sixpack577 Top Gun Registered

    Contests won:
    0
    The exhaust difference between gen 1 and 2 is the bend under the oil pan. It's usually a non issue.
    Other thing is the muffler mount holes in the passenger pegs. It's further back on a gen2.
    If the muffler (s) have sliding hangers(akropovic does), then the mount location isnt a problem either.
     
  13. Mike Chambers

    Mike Chambers Registered

    Contests won:
    0
    I have the two brothers system on my bike and like the yoshimuri system fits both gen models
     
    sixpack577 likes this.
  14. SpeedCrazy

    SpeedCrazy Registered

    Contests won:
    0
    Name:
    Gary McGlamery
    Is this pipe available akrapovic
     
  15. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
     
  16. Mathewrussell52

    Mathewrussell52 Registered

    Contests won:
    0
    Name:
    Mathew
    Where were all you guys looking for exhaust when I gave this away lol.
     
    sixpack577 likes this.
  17. sixpack577

    sixpack577 Top Gun Registered

    Contests won:
    0
    Never fails
     

Share This Page