8 Secs... Coming soon

[8secBusa]

Well, my bike guy just priced out the following.. 1397 kit with JE pistons, Web 378/330 cams, & adj sprockets.. He estimates about 25-30HP gain, which I assume, with a decent launch should get me in the very high 8 second range....

Price of parts: $1900

Bike dynoed at 169 last time on pump gas, and ran on average 9.5's at 144. Is 30HP worth .6 and 8-10MPH???

 

[goodluck]

Well, my bike guy just priced out the following.. 1397 kit with JE pistons, Web 378/330 cams, & adj sprockets.. He estimates about 25-30HP gain, which I assume, with a decent launch should get me in the very high 8 second range....

Price of parts: $1900

Bike dynoed at 169 last time on pump gas, and ran on average 9.5's at 144. Is 30HP worth .6 and 8-10MPH???

is this price installed if not i can show you were to get the same parts with some extras for about 300 cheaper

 

[Professor]

There is a set of cams in the for sale section!

 

[mountainmotor]

If your going to spend around 2k bucks I'd make certain it had enough motor to run in the 160mph range .

It's going to need something like the exhaust cam I have for sale with proper choice of intake cam and installed lobe center angles + some portwork .

Your only around 500.00 - 700.00 away from having enough engine to get close to your goals .

 

[8secBusa]

Hey GOODLUCK, that was the price of parts only as follows:
600 Web cams (378/330)
150 Adj Sprockets
1050 1397 kit with block exchange & 13.1 JE pistons..

Better prices much apreciated... I looked in the fore sale section, and didn't find those cams that were for sale.

 

[mountainmotor]

Hey GOODLUCK, that was the price of parts only as follows:
600 Web cams (378/330)
150 Adj Sprockets
1050 1397 kit with block exchange & 13.1 JE pistons..

Better prices much apreciated... I looked in the fore sale section, and didn't find those cams that were for sale.

Cams for sale

I have that WebCam set you listed for $400.00

You can also shop around and get the 1397 kit for about 950.00