Fairing Screens??

[busa-bager]

Hello,
I am looking for Fairing Screens, where should I get them, or who should I get them from.


Thanks

 

[Vic_E55_2001]

Hello,
I am looking for Fairing Screens, where should I get them, or who should I get them from.


Thanks

Right here

 

[MoNoXiDe]

I'd have to say, this was one of the best things I have done to the bike. It really looks nice to add the screens.

 

[Mainebusa]

I just installed mine about a month ago and I loooove the look of them. Got mine off eBay for about $35. Took my time and put a lot of attn into the prep, cleaning where they would be attached and putting blankets on some saw horses and suspending enough wieght to hold the screens in place and secure against the fairings, without being to much for the screen and fairing. Around 1-2 pounds

 

[Blacknite29]

If you are in Fredericksburg Virginia, DM me and I'll help you get your done. Done a few bikes with screen.

 

[Jenny Busa]

You can buy a screen kit already cut and molded on line for about $35.00. I have seen black,red and silver.

 

[Mikew777]

these are what i have in my bike. I am highly satisfied with them and the quality.
http://www.2wheelgrilles.com/08-16-hayabusa-6-piece-side-fairing-grille-set-black/

 

[Blacknite29]

If you are in Va. (22508) and need help with the screens, let me know. Ive done quite a few and i have everything thats needed to get it done in my garage.

 

[pashnit]

Good mod threads never die. Time flys. 15 years.

Have now done this mod several times, 4 different bikes. Not much for install pics though on this thread. Of the 4-5 times I've done this, pre-fit chromed screens are my favorite. Also got a set for the TL1000R.

Install on the TL1000R

BEFORE:

AFTER

 

[pashnit]

Other thread on the site has you using 1 lb weights to hold the fairing screens in place, but this is easier. I have a lot of woodworking stuff around the shop, so I used clamps. Super simple. No string, tying, etc.

Dab the glue on with a screwdriver in the corners, it hardens very quickly-couple minutes. Let them sit overnight and done.

Gen-I Hayabusa

Gen-II Hayabusa

End result:

 

[pashnit]

Finished product

 

[pashnit]

The one thing I did not anticipate was adding the T-Rex No-Cut Sliders. Had to carefully clip out a portion of the screen on both sides.