My Nitrous Solenoid

[Gixx1300R]

 

[outlawbusa]

I want the dragons

 

[dadofthree]

Very Nice

 

[GoldenChild]

when you get them done I would like to do some testing.. i'm building a fresh motor right now..just missing bigger block.

 

[Gixx1300R]

when you get them done I would like to do some testing.. i'm building a fresh motor right now..just missing bigger block.

I will keep you in mind. Specs are

1000 psi operating pressure
Orifice sizes .190 to .380
Life expectancy--infinite
cycle rate 2000 per minute
response to .01 open -.01 close
shock load 15g
operating temp -320*F to 350*F before failure
1/4NPT inlet and outlet (1/8 for smaller models)
weight 12oz

 

[GoldenChild]

I will keep you in mind. Specs are

1000 psi operating pressure
Orifice sizes .190 to .380
Life expectancy--infinite
cycle rate 2000 per minute
response to .01 open -.01 close
shock load 15g
operating temp -320*F to 350*F before failure
1/4NPT inlet and outlet (1/8 for smaller models)
weight 12oz

nice, i'll be waiting.. I'm putting a small shot on my street bike hopefully this week if I get time..

 

[Gixx1300R]

Machining the big solenoids and then I will work on the smaller solenoids in about 3 to 4 weeks. The Anodizing will look very good once they are done.

 

[Dust]

Will they be able to take methanol?

 

[Gixx1300R]

Will they be able to take methanol?

Yes, Methanol, Alcohol, Water and Fuel

 

[Gixx1300R]

As someone stated "My cute little Dragons"...... with 4 outlets

 

[Fernman]

me want!!!

 

[GoldenChild]

how long before you have a beta one for me to test?

Dyno has just came back from montana and 100% upgraded... It's ready for some abuse.. I'll be honest with my findings...

 

[Gixx1300R]

how long before you have a beta one for me to test?

Dyno has just came back from montana and 100% upgraded... It's ready for some abuse.. I'll be honest with my findings...

Just waiting on the patent paper work and to have them anodized. Maybe a week or so. I already have a provisional patent.

 

[GoldenChild]

Nice, I like testing new stuff..if it works out..

Just waiting on the patent paper work and to have them anodized. Maybe a week or so. I already have a provisional patent.

 

[ogre]

schweet.

 

[Gixx1300R]

For those with exsisting Nitrous systems that already have a showerhead or who wants to fogg the airbox.

For the badass V Twin bikes that can handle up to a 300 shot

For the V6 cars--gotta run 4 solenoids (2 on each side)

For 4 cylinder and V8 cars (V8 cars will need 2 Nitrous and 2 Fuel solenoids)

 

[teezy]

How much are the 4 shower solonoid gonna run?

Can they be pulsed like the wizards of nitrous solonoids?

is the adjustable nut on the end so you dont have to run jets anymore?

 

[Gixx1300R]

How much are the 4 shower solonoid gonna run?

Can they be pulsed like the wizards of nitrous solonoids?

is the adjustable nut on the end so you dont have to run jets anymore?

Pulsing is NOT what you want to do with a solenoid. It is a shame that someone even put it out there about that pulsing crap. My solenoids are design to be PROGRESSED. No solenoid on the market should be pulsed. That is just a marketing ploy. I will post more pics and priced next week. Yes you will have to run jets (for now)

 

[Gixx1300R]

 

[GoldenChild]

I like...you close to a price and time frame to ship?