Recent content by SSGT_B

Got out for a few tacos with my cousin this morning. Even got the opportunity to romp on it from a light. Had to let off the throttle as it was picking up the nose. Doubt the wheel would have left the ground but it was feeling lighter. Here’s a crappy pic.

I did the headlight ring a while back so I finally got around to doing the running lights and signal lights. There’s definitely a learning curve to it and I’m sure as I do more. It will get better, but it didn’t come out that bad. De-pin the connections to take apart. Out gas’s the parts for...

Pie or cake?

Still got pie?

Moved the shock reservoirs from top mount to down lower.

Rode around the block today. 1st time on the bike since December. Didn’t get out of second gear but it still felt nice. Now don’t let the wife know…lol. Still not medically allowed to drive :). So I got it cleaned up, removed the tour pack so it’s a bit easier for me to manage atm, waxed and...

Bike is done! 112.5 hp 121 TQ. After all was said and done, the cam was bad from the factory. They put in a new matching cam, and the bike tuned perfectly. Never would have thought the cam would be bad out of the box.

Got pie?

Did you get pie?

When I had one, kerosene and a chain brush. Then a soapy water bath followed by a good day of drying in front of a fan then chain wax

Tbh, this is starting to take the fun out of modding and riding. Not sure if I will stay with the Harley brand, there are quite a few I still like, but there will be a lot of thought put into my next direction.

Talked to the shop yesterday. He is changing out the exhaust to see if that will fix it and if not they are pulling the cam in the event it was a bad part from factory. After that they are out of guesses.

The bike won’t throw codes, spots and sputters between 2100-3200 then runs like an ape. Powervision tuner. They have swapped every electric component to include the ecu and it will not tune out. Sent many logs and tuns back and forth to dynojet. Ran techno research on it and are stumped. They...