Any good fork shimming methods or tricks

[lssna]

I have gsxr 1000 forks and using a stock Hayabusa lower triple clamp thats 1mm larger. Anybody have a good trick way or the proper way its done.

 

[S-R Racing]

Check ebay to get the right parts or pieces for that, plenty sets of triples for like $30 or less. Not the place for taking shortcuts considering loads & demands we place on our forks under hard braking or slammin' down from a wheelie just as a couple examples.
Posted via Mobile Device

 

[Fastfrog007]

Check ebay to get the right parts or pieces for that, plenty sets of triples for like $30 or less. Not the place for taking shortcuts considering loads & demands we place on our forks under hard braking or slammin' down from a wheelie just as a couple examples.
Posted via Mobile Device

Hogwash I say, just wrap it in duct tape and sinch her down!!!

JK

 

[red1100cc]

yea, i think i'd be looking for some different trees for shure.
unless you have a buddy with a lathe, but i donno about that.

 

[AJAY]

Are the tube center-to-center dimensions IDENTICAL to the Busa fork? If so, you could sleeve it with some shim stock. check Grainger or McMaster-Carr for material.