moloko
Banned
Did my first adjustment on the 'Busa. I've done it several times on my Hard tail, but it's a bit different cuz, not nearly as high performance, and no suspension load.
Seemed to have went well. Don't have a torque wrench, just snugged it up real good, not straining myself by any means, then another tug to line up the cotter pin holes.
Got about 1/2 in up, 1/2 in down play in the center of the bottom of the chain, pressing on it with i'd say medium force each direction, not forcing it past where it just naturally wants to stop each way.
Sound about right?
Drove it up and down the block, doesn't want to pull either direction so I'd say the tire is even on straight! woohoo
Seemed to have went well. Don't have a torque wrench, just snugged it up real good, not straining myself by any means, then another tug to line up the cotter pin holes.
Got about 1/2 in up, 1/2 in down play in the center of the bottom of the chain, pressing on it with i'd say medium force each direction, not forcing it past where it just naturally wants to stop each way.
Sound about right?
Drove it up and down the block, doesn't want to pull either direction so I'd say the tire is even on straight! woohoo