Pair/Reed Valve block off...

[ks-waterbug]

Originally Posted by busaville @ Jun. 15 2008, 10:41 PM

Good question ... even though I did the marble mod. all ready, will it cause any problems by blocking off the pair/reed valve? Will I gain or loose HP? What is the effect of this mod. other than to stop the popping of the exhaust?

IMOP.. There is no significant gain or loss in HP doing this mod! The purpose of the pair valve is to add air back in the mixture at the converter to help pass emissions.

[busaville]

you are the man ... thank you sir.

[Joker]

[freponyryd]

A golf tee fits in there real nice too.

[bigmike32172]

I did the Home Depot chair leg mod and it worked well. No more popping, and it's less weight than the marble!

[scoot]

i used a rubber tapered plug... fit tight and snug.. had some in the tool box....no more popping...4-5 more ponies now....thanks pair valve.

[scoot]

used a tapered rubber plug.. fit justright, had it in the tool box....all done and tons more power now..ahahahah

[chimaira]

hi all, i work for a medical and laboratory equipment manufacturer, so we had 927 5/8" copper tubing caps. I "borrowed one and quickly went home to install it. i installed it and added a touch more fuel in the acceleration mode on my juice box, and BAM! no more pops or crackles during decel or changing gears between 1st and 2nd or 2nd and 3rd...... i have the two bros carbon slip ons, and juice box set up, and a puig smoke double bubble at present.....

[zeromr]

Does it matter if it pops on decel? Will it hurt the motor? Mine pops pretty loud on decel.

[BIKE DUDE]

Originally Posted by chimaira @ Jun. 26 2008, 4:30 PM

hi all, i work for a medical and laboratory equipment manufacturer, so we had 927 5/8" copper tubing caps. I "borrowed one and quickly went home to install it. i installed it and added a touch more fuel in the acceleration mode on my juice box, and BAM! no more pops or crackles during decel or changing gears between 1st and 2nd or 2nd and 3rd...... i have the two bros carbon slip ons, and juice box set up, and a puig smoke double bubble at present.....

What is a "juice box" set up

[pulk]

Thanks tons for the sticky. Going to try this tomorrow cause I have a very slight decel pop with the yosh full r77

[BIKE DUDE]

Originally Posted by pulk @ Jul. 14 2008, 12:34 AM

Thanks tons for the sticky. Going to try this tomorrow cause I have a very slight decel pop with the yosh full r77

Mine is more than slight with the full R77 but it doesn't really bother me.

[pulk]

I used the 5/8" furniture leg caps to plug mine, man what a difference. Thanks again.

[chimaira]

Originally Posted by BIKE DUDE @ Jul. 13 2008, 11:24 PM

What is a "juice box" set up

a juice box is a fuel injection controller marketed by two brothers racing. after i purchased it i found out theat it is in fact manufactured by dobeck industries. all this controller does is add fuel to rememdy a lean condition caused by modifying your exhaust or air filter.

[Greenbean]

Can any harm be done by not doing this mod...

I installed my Hotbodies megaphone tips last night and love the exhaust barble that goes on when you are off the gas and throttle open, engine sounds awesome as it burbles and gargles the fuel...

Guess I'll try and hit up Lowes find a plug, install it, and see what the difference is.

[busagalaxy]

[Greenbean]

Originally Posted by Greenbean

Can any harm be done by not doing this mod...

Bueller,

Bueller,

Anyone, Anyone....

[WarBirdII]

The juice box is the Techlusion TFI box (From Dolbeck Performance) with a 2 brothers racing logo on it. I have one my 02 gsxr 1000. Nice easy to tune if you dont go to radical on the mods. Low speed, Acceleration and W.O.T. fuel pots. Adds fuel only.

[2008 Orange Crush]

I didn't have a problem with popping, but I decided to do it just in case it starts after I'm done breaking it in. Nice and easy mod, it took no time.

[supersoldier]

My M4 slip ons cackled and popped like a *****... 1 marble later and its sweet as Bro!!