Switching to Engine Ice

TA_GunSurgeon

Donating Member
Registered
I went out and bought engine ice today want to make the switch tomorrow when I do my oil change. Is there anything special i should know? How do you flush out all the old anti freeze from the engine? If anyone else could chime in on exactly how they went about making the switch. Also do you have to bleed the coolant circuit or can you let the engine run to get all the air out?
 
Why
rock.gif






It does get below freezing where you live.

Is it going on the track, where no anti freeze is allowed?


I'm curious.
 
It will be going to tracks where they don't allow regular anti-freeze and yeas it gets below freezing here.
 
its not good antifreeze. but who is ridding below zero or storing their bike below zero? on the bottle or the web site says to flush system with a 50/50 mix of distilled water and vineger mix. then flush that out with plain distilled water. then add ice. after your done filling it with almost 1 gal. of ice youll have to burp the system by squezzing the radiator hose with the cap off.

here just read some of these
beerchug.gif


https://www.hayabusa.org/forums....end=&p=
 
Back
Top