ohlins forks and rear spring

bulldog

Registered
do you know if ohlins forks and rear shock from an 06/07 would fit an 08 thanks also brembo discs and calipers thanks
 
The rotors are not the same as the gen 1 busa. They do match rotors from other Suzukis like the GEXR600 and maybe the 1000. I remember my galfer rotors were in a box labled as GSXR600.

The calipers are radial mount for 08 and as I recall the Gen 1 busa was not. At least the 99-2000 and 2004 busas that I had were not radial mount calipers.

I think the rear shock may be the same but I dont know about the forks. Call Ohlins they will know because they just built my 2008 busa forks.
 
wowold.gif
thumb_up.gif
 
The front forks & brakes on your 08 busa is the same as the GSXR1000 the brakes will not work from your old generation busa. The fork tubes on both are 50mm in diameter so as long as you can bolt up the proper brakes and fender you can use any 50mm fork tube.
 
Back
Top